Arca Swiss F - fix stiff front focus?

jpeets

Member
Joined
Oct 20, 2005
Messages
1,039
Location
Southern Ont
Format
Large Format
HI!

I just picked up an F-line classic from Craigslist: camera, two lensboards, wide angle bellows, and reflex viewer for $500.

The camera is in VG+ condition overall, but the front focus is a bit stiff. Does anyone know how to adjust the friction? It isn't a problem with the rail, since the movement is still stiff on the other section of the rail, where the rear focus is smooth.

Thanks in advance for any help/suggestions

Jaan
 

eclarke

Member
Joined
Jun 11, 2004
Messages
1,950
Location
New Berlin,
Format
ULarge Format
The carrier is split like a clevis and if somebody tightened the knob while the carrier was off the rail it could have compressed the dovetail making it too tight on the rail. It's a little tricky to spread the dovetail without scratching or gouging it. Dont try to sand the inner race of the dovetail, it must remain flat....Evan Clarke
 

StreetShooter

Member
Joined
Aug 17, 2004
Messages
40
Format
4x5 Format
Jaan,

Is this the kit that was listed on the Toronto CL?

Send it down to Precision Cameras and they'll make sure to repair it properly.

Cheers
 
OP
OP

jpeets

Member
Joined
Oct 20, 2005
Messages
1,039
Location
Southern Ont
Format
Large Format


Thanks!

It's really not bad enough to risk a home repair job. I likely won't use the front focus that much anyway.

Thanks for the advice!

Best regards,

Jaan
 
OP
OP

jpeets

Member
Joined
Oct 20, 2005
Messages
1,039
Location
Southern Ont
Format
Large Format
StreetShooter said:
Jaan,

Is this the kit that was listed on the Toronto CL?

Send it down to Precision Cameras and they'll make sure to repair it properly.

Cheers
Click to expand...

It is. I am really pleased with the overall condition, and the stiffness is really only relative to the rear focus. It's a very nice camera. Now if I could find a nice digital back for a couple of hundred dollars (duck) .......

If it starts to bug me, I'll certainly go to the experts on this one. Thanks for pointing me in their direction.

Jaan
 

resummerfield

Subscriber
Joined
Jan 28, 2005
Messages
1,467
Location
Alaska
Format
Multi Format
Just a quick comment.... are you sure the friction lock is fully released? There are two, concentric knobs on that focus control--the inner one is to set friction.
 

StreetShooter

Member
Joined
Aug 17, 2004
Messages
40
Format
4x5 Format

Jaan,

Have to say, "I gave that posting a thought too!"

Good buy!

Be careful with self-repairs... a friend of mine just purchased a 5x7 A/S camera and the previous owner (or, someone) tried to repair it at home (apparently.)

At the end of the day, it seized up in the field and had to be sent down to Precision Cameras. Long and short of it was that it ended up costing far more than it should have to repair the damage.

Btw, Precision Cameras is the authorized repair depot for Arca Swiss in the US.

Have fun with the new toy!

Cheers
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…