Analyser Pro PAP setting for colour enlargers

Hi I was wondering if anyone had used the PAP3 paper setting when using the analyser pro with a colour head enlarger ? Did you find that it got you close to what you wanted?
Thanks
Ade

Out of the box the Analyser Pro has the settings for Ilford MG IV. If you use a different paper YOU have to put the data into each channel. You can do this with the starting recommendations or do a calibration test. The recommendations are based on Ilford below the lens filters. I have a colour head so had to do a calibration test to use the filters in the head. Once calibrated the Analyser Pro gets me to a very good print very quickly. I don't agree that it eliminates test prints like their advertising says but it does save a lot of time in the darkroom.