Almost finished my first pinhole camera

Oh, I forgot to add how I got my times. I found the exposure time for the couch picture by finding the exposure at F/16. The exposure was 4seconds @ F/16. I used my aperture chart and saw that f/512 was 10 stops under f/16, so I added 10 stops to 4 seconds. That's what gave me about 70 minutes. Actually, I came up with a little more than 68 minutes, but I rounded up

Existing Light said:

Oh, I forgot to add how I got my times. I found the exposure time for the couch picture by finding the exposure at F/16. The exposure was 4seconds @ F/16. I used my aperture chart and saw that f/512 was 10 stops under f/16, so I added 10 stops to 4 seconds. That's what gave me about 70 minutes. Actually, I came up with a little more than 68 minutes, but I rounded up

Click to expand...

Let's think about this!

I agree with your f/stop calculation, but I think f/360, which is 9 stops from f/16 is close enough. Now to the exposure time:

You said you measured 4s at f/16 (are you sure, it wasn't 1/4 s at f/16). Assuming it was 4 s and the 9 stops above, this calculates to:

1st stop > 8s at f/22
2nd stop > 16s at f/32
3rd stop > 32s at f/45
4th stop > 1m at f/64
5th stop > 2m at f/90
6th stop > 4m at f/128
7th stop > 8m at f/180
8th stop > 16m at f/256
9th stop > 32m at f/360

and this doesn't even include reciprocity, which would take it to:

> 2h at f/360 (I don't think so)

It must have been 1/4 s, wasn't it? In which case:

1st stop > 1/2s at f/22
2nd stop > 1s at f/32
3rd stop > 2s at f/45
4th stop > 4s at f/64
5th stop > 8s at f/90
6th stop > 16s at f/128
7th stop > 32s at f/180
8th stop > 1m at f/256
9th stop > 2m at f/360

and with reciprocity failure:

6-12 minutes, depending on the film.

RalphLambrecht said:

(are you sure, it wasn't 1/4 s at f/16).

Click to expand...

That looks effectively very longue. How was the light?

Existing Light said:

I just developed my first pinhole print. Results were less than amazing It's waaaay underesposed. It's my first try, though, so I'm not too disapointed.

Click to expand...

Do not worry, usually the first try is a disaster. With the time you indicate, I am surprise you are underesposed.

RalphLambrecht said:

You said you measured 4s at f/16 (are you sure, it wasn't 1/4 s at f/16).

Click to expand...

FWIW, I grabbed my Luna Pro and set it at 200. My well lit basement rec room couch read 2-3s at f/16. The much dimmer lit (it is night) living room couch gave 60s at f/16.

RalphLambrecht said:

Let's think about this!

I agree with your f/stop calculation, but I think f/360, which is 9 stops from f/16 is close enough. Now to the exposure time:

You said you measured 4s at f/16 (are you sure, it wasn't 1/4 s at f/16). Assuming it was 4 s and the 9 stops above, this calculates to:

1st stop > 8s at f/22
2nd stop > 16s at f/32
3rd stop > 32s at f/45
4th stop > 1m at f/64
5th stop > 2m at f/90
6th stop > 4m at f/128
7th stop > 8m at f/180
8th stop > 16m at f/256
9th stop > 32m at f/360

and this doesn't even include reciprocity, which would take it to:

> 2h at f/360 (I don't think so)

It must have been 1/4 s, wasn't it? In which case:

1st stop > 1/2s at f/22
2nd stop > 1s at f/32
3rd stop > 2s at f/45
4th stop > 4s at f/64
5th stop > 8s at f/90
6th stop > 16s at f/128
7th stop > 32s at f/180
8th stop > 1m at f/256
9th stop > 2m at f/360

and with reciprocity failure:

6-12 minutes, depending on the film.

Click to expand...

For the shot in my living room, the exposure was actually 4 seconds @f/16. It was hard for me to believe, too. You have me doubting myself now, so I'll check again tonight. I cant check right now because I took the picture of my couch at night, so there was no (or very little) light coming in through the windows.

I didnt adjust for reciprocity at all on the first one, and I kinda just guessed at reciprocity adjustment on the second shot I did outside.

I noticed that you adjusted for reciprocity by adding about two stops overexposure. Is that a rule of thumb kind of thing or is there an actual equation for adjusting for reciprocity? I've read the data sheet for hp5+ and found the recirpocity chart, but I dont think it covers exposures longer than 75 seconds. I dont have it printed out, but I'll look it up again and make sure about that

You will find a lot of info at http://www.mrpinhole.com/index.php

Existing Light said:

For the shot in my living room, the exposure was actually 4 seconds @f/16. It was hard for me to believe, too. You have me doubting myself now, so I'll check again tonight. I cant check right now because I took the picture of my couch at night, so there was no (or very little) light coming in through the windows.

I didnt adjust for reciprocity at all on the first one, and I kinda just guessed at reciprocity adjustment on the second shot I did outside.

I noticed that you adjusted for reciprocity by adding about two stops overexposure. Is that a rule of thumb kind of thing or is there an actual equation for adjusting for reciprocity? I've read the data sheet for hp5+ and found the recirpocity chart, but I dont think it covers exposures longer than 75 seconds. I dont have it printed out, but I'll look it up again and make sure about that

Click to expand...

Reciprocity differs with emulsions, but the attached chart may serve as a guide. This is the reciprocity chart from Way Beyond Monochrome'. It is constructed from data, I received from Howard Bond, John Sexton and my own experiments. It has served me well so far.

Thanks for the chart, Ralph.

I wish I could upload scans of the negs, but it seems like i'm going to have to wait till I have some prints. My flatbed scanner doesnt like stuff that isnt opaque or nearly opaque

Fuji Acros 100 has virtually no reciprocity failure at typical pinhole exposure times. So it ends up being faster than more traditional 400-speed films.

~Joe

Joe VanCleave said:

Fuji Acros 100 has virtually no reciprocity failure at typical pinhole exposure times. So it ends up being faster than more traditional 400-speed films.

~Joe

Click to expand...

Joe

virtual, typical? You've got some data?

Acros needs no change in exposure for anything up to 2 minutes according to Fuji. Beyond that, and it does apply, but I've not done any formal
testing beyond 2 minutes.

Andrew Moxom said:

Acros needs no change in exposure for anything up to 2 minutes according to Fuji. Beyond that, and it does apply, but I've not done any formal
testing beyond 2 minutes.

Click to expand...

Thanks.

Has anybody tried this an can share an experience?

Well, I've shot and developed a few more shots with my pinhole camera, and i'm suprised at the sharpness of the negs. While it's obviously not up to par with my Canon L lenses, I am suprised at the sharpness and detail.

I do have one dumb question (well, one more dumb question ).

I did some contact prints on Arista edu glossy and Slavic double weight FB paper, and noticed what I first thought was the dreaded newton rings. but before I went out and bought some anti newton ring glass, I decided to look at my negs. I noticed they had the little bands in the sky areas just like my contact prints did. They're not perfectly circular; they look more like really thing faint tree rings or the ridges of a fingerprint. Unfortunatly, they dont show up in the scan of the prints. I'm assuming that's a development problem, but could the pinhole cause that kind of problem?

The pictures are shot outside on an overcast day, so there's no direct sun. The 5x7 negs are HP5+ developed for 10 minutes in Rodinal 1:50 @ 20C in a 6x9 flat-bottom tray I found at Target. I did an intermittent agitation scheme like I do my 3mm negs: Agitation for first 30 seconds, then 10 seconds every minute. I also picked the negs up out of the developer and let the developer drip off the corner at the end of every agitation. The total time for agitation and picking the negs out of the developer and putting them back in took like 20 seconds.

If it's development related, could someone tell me a better tray developing method or give me a link? I'm really not finding much, but perhaps i'm just overlooking something very obvious.

BTW, the rings show up more in the glossy Arista paper than the matte Slavic paper