A screw loose (and two missing) Nikkor-Q.C 135/2.8 Auto

philipus

Member
Joined
Feb 6, 2012
Messages
210
Format
Medium Format
Hello everyone

My copy of this lens lacks two of the three screws on the silver ring. Is it possible to find such screws?

I'm not sure if all three have the same dimensions, but I've included a photo of the one remaining, which is the first one to the right of the aperture indicator dot). I estimate it to be 0,5cm in length.

I'd like to use this lens more but I'm afraid to lose the last screw as even if I tighten it, it gradually loosens over time due to the ring's movements.

Thank you very much in advance
Philip

 

Mamiya_Repair

Advertiser
Joined
Feb 7, 2019
Messages
222
Location
Nevada
Format
Medium Format
The original Nikon screws on this lens are 1.4mm x 4mm flathead. But, the flathead is a fairly small diameter, not likely to find such a small head screw, you would have to modify a screw head to fit flush. If you don't want to do that, you could use a panhead screw with a little longer length, maybe 4.5mm but the screw would not fit flush.
 

abruzzi

Member
Joined
Mar 10, 2018
Messages
3,060
Location
New Mexico, USA
Format
Large Format
if you don't want it loosening, put a tiny dab of blue loctite on the threads before threading it in.
 

Bushcat

Member
Joined
Jul 16, 2022
Messages
126
Location
Tokyo
Format
35mm RF
McMaster-Carr might be a good starting point, if you don't want to pop in to a camera shop or similar. They're friendly emailers.
 
OP
OP

philipus

Member
Joined
Feb 6, 2012
Messages
210
Format
Medium Format
Thank you very much for your replies. I will try to find a suitable screw and will get some blue loctite too.
cheers
Philip


if you don't want it loosening, put a tiny dab of blue loctite on the threads before threading it in.

McMaster-Carr might be a good starting point, if you don't want to pop in to a camera shop or similar. They're friendly emailers.
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
52,939
Location
Delta, BC Canada
Format
Medium Format
Thread moved to the Camera Repairs sub-forum, because that is what its about
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…