jimgalli
Allowing Ads
Tonight I have a couple of hard to find necessary pieces for someone. First is an Eastman / Graflex / Folmer 8X10 film back. This will fit Kodak 2D and Century 8X10 cameras.
It's not the prettiest one I've ever had, but it'll do if you need one. It needs a tune up. Someone was tweaking on the springs and the back drags in the frame from bad pressure angle. These are simple to tune up. Just put it back how Eastman made it, put some glass in, and go to work.
$145 for the back.
Next is a very nice usable Packard Shutter Instantaneous #6 with mounting screws and the on-off button.
This one is working GREAT! It also has the sync contacts (untested). The only tiny flaw is someone has bumped off the little can that the pin goes into on the back. No biggie as long as the pin is blocking the light, but left wide open, this would be a light source. Pin plugs up the light perfectly.
This one is 5 3/4" square with a 3 inch aperture. Need $85 for it. You pay shipping of course.
It's not the prettiest one I've ever had, but it'll do if you need one. It needs a tune up. Someone was tweaking on the springs and the back drags in the frame from bad pressure angle. These are simple to tune up. Just put it back how Eastman made it, put some glass in, and go to work.
$145 for the back.
Next is a very nice usable Packard Shutter Instantaneous #6 with mounting screws and the on-off button.
This one is working GREAT! It also has the sync contacts (untested). The only tiny flaw is someone has bumped off the little can that the pin goes into on the back. No biggie as long as the pin is blocking the light, but left wide open, this would be a light source. Pin plugs up the light perfectly.
This one is 5 3/4" square with a 3 inch aperture. Need $85 for it. You pay shipping of course.
