For Sale 6" Packard Shutter w/ 3" Opening Serviced Complete w/Bulb Ready to Play

Trader history for jimgalli (6)

Donation to Photrio
% will be donated to Photrio

jimgalli

Subscriber
Joined
Sep 7, 2002
Messages
4,236
Location
Tonopah Neva
Format
ULarge Format
Cleaned, serviced and a very good one to begin with, this Packard runs Awesomely. Put those barrel lenses AND creativity to work for you! Includes tubing and original Button for Manual / Instantaneous. $95 + something for the post.
 

Attachments

  • IMG_7476.jpg
    205.4 KB · Views: 67
  • IMG_7477.jpg
    176.2 KB · Views: 62
  • IMG_7478.jpg
    132 KB · Views: 62
  • IMG_7479.jpg
    160.8 KB · Views: 57
  • IMG_7480.jpg
    163.7 KB · Views: 69
  • IMG_7481.jpg
    141.8 KB · Views: 65

Martin Frank

Subscriber
Joined
Jan 21, 2005
Messages
32
Hi Jim, I've been toying with the idea of obtaining a barrel 21 1/4" Kodak copying ektanon and putting it on a korona (5/14" squared) lensboard with a packard shutter. Maybe the shutter could be trimmed? Or used in front of the lens?
Might you have any ideas?
Thanks-Marty
 
OP
OP

jimgalli

Subscriber
Joined
Sep 7, 2002
Messages
4,236
Location
Tonopah Neva
Format
ULarge Format
Marty, if your bellows is in decent supple shape what you do is put the Packard inside the camera right at the inner side of the front standard with first bellows fold sort of holding the Packard in place snugly. Then you have to bet an airway from inside to outside somehow (can be tricky). But once that's accomplished you can buy ALL my old barrel lenses and all you have to do is make up a lens board. Yes, outside shutters work OK too. Glue a 'core' from a 2" wide tape refill when it's empty and then you put some foam to make the lens a tighter fit to the 3" wide X 2" deep core.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…