Ira Rush
Member
Yes… I’m still using an EL/M … took about 30 seconds to get used to the “smaller mirror” and I use a flash meter, so the bells and whistles that go along with the ELX are minimal at best.
Anyway began to notice however that when used in the “AS” mode, firing rate doesn’t seem to be really any faster then in “A” mode. Pouring through “Wildi ”, I found that in “AS” mode it “should” shoot about 12 frames in less than 10 seconds (as it’s in a “pre-released mode”). However, it seemed to be about 12 frames in 12 seconds, same as “A” mode. I somehow remember that it did seem a bit faster in "AS" previously, but now I'm not so sure anymore.
Not an issue with batteries, as they are fully charged. Not using 9volt or AA conversion adapter, I'm using my trusty NiCads.
In addition I tried it with AC power (the connecting cable was less than 20 feet as longer cables tend to cut the power coming into the camera to a trickle), with the same results.
So anyone out there still using an EL/M or even the ELX (500/553)?
Do you notice a significant difference between “A” and “AS” mode?
So… wait for the checkered flag, get out your stopwatches and start timing. Let me know if I should take my EL/M for servicing. It’s been about 2-3 years since last CLA.
No other problems with it and I’m not exactly shooting the Indy 500, so I can certainly live with this, … unless this is an advanced notice of more serious trouble down the road.
Thanks in advance
Anyway began to notice however that when used in the “AS” mode, firing rate doesn’t seem to be really any faster then in “A” mode. Pouring through “Wildi ”, I found that in “AS” mode it “should” shoot about 12 frames in less than 10 seconds (as it’s in a “pre-released mode”). However, it seemed to be about 12 frames in 12 seconds, same as “A” mode. I somehow remember that it did seem a bit faster in "AS" previously, but now I'm not so sure anymore.
Not an issue with batteries, as they are fully charged. Not using 9volt or AA conversion adapter, I'm using my trusty NiCads.
In addition I tried it with AC power (the connecting cable was less than 20 feet as longer cables tend to cut the power coming into the camera to a trickle), with the same results.
So anyone out there still using an EL/M or even the ELX (500/553)?
Do you notice a significant difference between “A” and “AS” mode?
So… wait for the checkered flag, get out your stopwatches and start timing. Let me know if I should take my EL/M for servicing. It’s been about 2-3 years since last CLA.
No other problems with it and I’m not exactly shooting the Indy 500, so I can certainly live with this, … unless this is an advanced notice of more serious trouble down the road.
Thanks in advance