BainDarret
Allowing Ads
Hi All,
I've had this Graphic View for almost a year now but I don't have the patience to try and fix it up.
The good:
It comes with the tripod mount
The bellows are light tight
I have managed to take an in focus photo with it.
A lens board to fit a 203mm Ektar is included.
The bad:
No lens included
It's pretty scuffed up
Cracks in the ground glass
The level is cracked and dry
The rack and pinion system for the front standard skips a lot, the rear standard not so much
The front locking knob locks ok but the rear one does not
The camera can be (barely) used by locking the front standard and focussing with the rear standard.
There is a hood for the ground glass. I found it got in the way so I took it off and put it in an envelope. It's there if you want to reinstall it.
I'm looking at $40 US OBO.
Paypal only please, buyer pays shipping.
Thanks for looking,
Mike
I've had this Graphic View for almost a year now but I don't have the patience to try and fix it up.
The good:
It comes with the tripod mount
The bellows are light tight
I have managed to take an in focus photo with it.
A lens board to fit a 203mm Ektar is included.
The bad:
No lens included
It's pretty scuffed up
Cracks in the ground glass
The level is cracked and dry
The rack and pinion system for the front standard skips a lot, the rear standard not so much
The front locking knob locks ok but the rear one does not
The camera can be (barely) used by locking the front standard and focussing with the rear standard.
There is a hood for the ground glass. I found it got in the way so I took it off and put it in an envelope. It's there if you want to reinstall it.
I'm looking at $40 US OBO.
Paypal only please, buyer pays shipping.
Thanks for looking,
Mike
Last edited by a moderator: