I have that 4x5 Graflok Divider Back by Graflex. First idea was getting one with 2x3-graflok to mount Mamiya RB67/70mm vacuum-back. I was wrong since its the larger Graflok-mount also on filmholder-side.
So i tried out Graflex RH50/67-70mm back(for Perforated and Unperforated 70mm film.
Since frame is not full 92 x120(i would have to cut it out) and my back(all of them) can only be mounted horizontally i am only getting a portion of what expected. not 68 mm heigth images(largest side of that 57 x68mm back. nor can i get full 120mm lenght since its a divider back with 56 x92mm frame.
the only advantage would be using it with NEW 55(1 image: 15 usd) since it will be divided onto 2 pieces of 56 x 92mm vertical. but from frame to film is a 2mm gap. i wonder how first exposed part can be protected, only second part is protected by darkslide.
So i took 545 is-polaroid holder to check that. dont have yet 4x5-camera-POLAROID MP3 coming.
Big surprise: left image was no problem but when sliding this back to the left, cameraside-grip would interfer slider since its 2mm too thick leading to lifting the back this match. Polaroid didnt think about that.
Would lead to interesting Scheimplug-effect!
So the question is: Which if the other 545-backs which can carry NEW 55 is slimmer? from filmbase to slide i have approx. 10mm 545-grip is protruding this by 2mm. Images will follow
So i tried out Graflex RH50/67-70mm back(for Perforated and Unperforated 70mm film.
Since frame is not full 92 x120(i would have to cut it out) and my back(all of them) can only be mounted horizontally i am only getting a portion of what expected. not 68 mm heigth images(largest side of that 57 x68mm back. nor can i get full 120mm lenght since its a divider back with 56 x92mm frame.
the only advantage would be using it with NEW 55(1 image: 15 usd) since it will be divided onto 2 pieces of 56 x 92mm vertical. but from frame to film is a 2mm gap. i wonder how first exposed part can be protected, only second part is protected by darkslide.
So i took 545 is-polaroid holder to check that. dont have yet 4x5-camera-POLAROID MP3 coming.
Big surprise: left image was no problem but when sliding this back to the left, cameraside-grip would interfer slider since its 2mm too thick leading to lifting the back this match. Polaroid didnt think about that.
Would lead to interesting Scheimplug-effect!
So the question is: Which if the other 545-backs which can carry NEW 55 is slimmer? from filmbase to slide i have approx. 10mm 545-grip is protruding this by 2mm. Images will follow