45Aii Tripod socket changing

ashokgoyal42 · Apr 29, 2013

Hi all,

I want to change the tripod socket from 1/4 inch to 3/8 inch, the manual says it's interchangeable and the camera came with a 1/4 icnh installed. Anyone experienced a similar issue and had any success with it? I've writted to Toyo as well.

Thanks in advance,
Ashok
(http://www.flickr.com/photos/10420002@N02/)

Jon Shiu · Apr 29, 2013

Many cameras have a 1/4" insert threaded into a 3/8" socket. Just need a screwdriver to remove the 1/4" insert.

Jon

ashokgoyal42 · Apr 30, 2013

Hi Jon,

I already tried that. Basically when I remove the 1/4 inch socket the whole socket comes out. I think I'll need a seperate part with a 3/8 inch opening.

Joe Wright · Apr 30, 2013

Hi Ashok,

I had the same camera, you are right. You need the completely seperate 3/8 adapter that screws back into that hole. The alternative adapter was passed onto me and likewise when I sold my camera.

ashokgoyal42 · Apr 30, 2013

Thanks Joe.

ashokgoyal42 · Apr 30, 2013

The 45Aii is supposed to come with two thread sockets. When you're buying it make sure both are with the package. I just bought the 3/8 inch from macgroupus.com - so my problem is solved.

Doremus Scudder · May 2, 2013

In the worst case, a machinist can make the part for you (especially since you have the 1/4" insert to use as a pattern). It will likely be a lot more expensive than the mass-produces part, so keep searching for one of those first.

Best,

Doremus

45Aii Tripod socket changing

ashokgoyal42

Jon Shiu

ashokgoyal42

Joe Wright

ashokgoyal42

ashokgoyal42

Doremus Scudder

Privacy & Transparency

Privacy & Transparency