Just wandering if any 4550XLG owners have purchased the 35mm mixing chamber for this LPL and what your experiences are with it? After getting it, did you feel it was worth it, etc....?
If it is anything like the Omega D5500 mixing box, you expect to gain about one stop (mine measures right between 1.5 and 1.333 stops brighter). So, you should be able to figure if cutting your printing times in half is worth it. I think so. A minute is a long time for an exposure but 20-30 sec is just right.
If it is anything like the Omega D5500 mixing box, you expect to gain about one stop (mine measures right between 1.5 and 1.333 stops brighter). So, you should be able to figure if cutting your printing times in half is worth it. I think so. A minute is a long time for an exposure but 20-30 sec is just right.
My darkroom is not finished so can't do any printing, but I did set the timer on the enlarger for 60 seconds, it did seem a very long time for a print exposure, I would not like that. Thanks for the input.
Chuck
I have one for my 4550 and it makes the image really bright but I haven't tried printing 35mm with the 4x5 mixing box for comparison. The times I get for an 8x10 with the attenuation filter closed and the lens set to f/8 are in the 8 to 12 second range with dichroic filtration on max magenta or yellow (that is a combined time). I also have to set the lens to f/8 for smaller prints otherwise I don't have enough time to dodge anything. At full extension of the head I get times of 12-15 seconds at f/5.6 with the attenuation filter open. These times are on VC papers such as Oriental.
The one caveat I would add to this is I don't know if the little condenser on the 35mm mixing box is large enough to use a wider lens like a 40mm for example. I have been meaning to ask here if anyone does it. I usually use a 65mm for enlarging 35mm though. I get perfectly even light with a 65mm. A 50mm still works fine but needs to be more carefully centered. (I use the 4x5 glass carrier with a home made mask for 35mm).
I have one for my 4550 and it makes the image really bright but I haven't tried printing 35mm with the 4x5 mixing box for comparison. The times I get for an 8x10 with the attenuation filter closed and the lens set to f/8 are in the 8 to 12 second range with dichroic filtration on max magenta or yellow (that is a combined time). I also have to set the lens to f/8 for smaller prints otherwise I don't have enough time to dodge anything. At full extension of the head I get times of 12-15 seconds at f/5.6 with the attenuation filter open. These times are on VC papers such as Oriental.
The one caveat I would add to this is I don't know if the little condenser on the 35mm mixing box is large enough to use a wider lens like a 40mm for example. I have been meaning to ask here if anyone does it. I usually use a 65mm for enlarging 35mm though. I get perfectly even light with a 65mm. A 50mm still works fine but needs to be more carefully centered. (I use the 4x5 glass carrier with a home made mask for 35mm).
Good point about the wide lens and big enlargements. The paradox is just when you need the extra light from the smaller mixing box for big prints, you may find that it does not cover the negative well. Or at least it needs to be perfectly centered.