2x3 in and 6x9 cm options for the "field"

Frank Bunnik

Member
Joined
Aug 18, 2008
Messages
81
Format
Large Format
What you might want to take into consideration is that the VH and VH-R models are the only ones with a rotating back. The 985, 980 and 970 do not have a rotating back and therefore you have to put the camera sideways on a tripod for vertical shots. There is a tripod attachment on the left side of the camera as well as on the bottom. The VH models also have an extra tripod attachment on the left side of the body but I do not see much use for that myself.

Before I bought my VH-R I did some research on the internet. From what I have learned, the Horseman Super lenses will cover 5x4 though I have no idea if they give much room for movements on 5x4. Plenty however on 6x9 and the quality on the edges of the picture should also be better compared to lenses designated for 6x9 only. The lenses that have an ER designation are multicoated. I have 2 Super ER lenses, a 75 and a 180mm. My other lens is a Topcor 5.6 150mm meant for 5x4, also multicoated.

I shot my first roll yesterday so later this week I will no more about the quality of these lenses. From a mechanical point of view the quality seems very good.
 

EASmithV

Member
Joined
Aug 22, 2008
Messages
1,984
Location
Virginia
Format
Large Format
I thought 6x9cm was medium format...
 

PCGraflex

Member
Joined
May 11, 2005
Messages
77
Location
Minneapolis, Minn
Format
Multi Format

Yes, Graflex made a "mini speed" and later the Century and Pacemaker models in 2x3. I routinely shoot with my mini speeds, on a tripod for landscapes with various lenses.
 

Oren Grad

Member
Joined
Feb 17, 2005
Messages
1,619
Format
Large Format

I have two Horseman cams; one of them has a serial number, the other doesn't.

In any case, they're not cut for a generic lens of that focal length, they're cut for a specific Horseman lens model of that marked focal length. However, you can't assume that the actual focal length matches the marked number, or that another vendor's lens of that nominal focal length will match the actual FL for which the cam was cut.
 

Curt

Member
Joined
Sep 22, 2005
Messages
4,618
Location
Pacific Nort
Format
Multi Format
I have a Busch C that takes all of the 2 1/4 x 3 1/4 roll backs, Grafmatic and sheet film holders. I converted it from the spring back to a Graflex with Graflok. It doesn't have a revolving back and cams for different lenses but it's a very nice camera and is light.

If my pockets were gunny sacks I'd have a full line of Ebony and Horseman.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…