2013 ULF Manufacture From ILFORD Photo / HARMAN technology Limited

StoneNYC · Nov 23, 2013

cmacd123 said:
My 46mm rolls also came today, I wonder if it will be safe to freeze one?

As far as the packaging, ILFORD has for years used the paper box with the plastic bag for their bulk film. I suspect the cans disappeared by the 1990 era. Even the old private label stuff was in a box. Basically the same type of package as Paper is supplied in.

The 46mm rolls just have a printed label with the size and the complete address of the maker. And a batch number, no suggested expiry date. I was surprised by the shape of the box, I wonder if they used the same package for the 70mm film? (Stone you have both - care to comment?)

Same box size, I'm sure that's why it's bigger than last years box, to accommodate the 70mm.

One of the boxes strangely came in styrofoam packaging while the rest were simply wrapped in cardboard. It's caused a lot of problems with styrofoam pieces sticking to the dark bag and film/packaging. I'm not sure why or what happened, it's just one of 4 70mm had styrofoam...

Anyway I've put an inquiry in to find out.

I'm also curious about the storage, since it's not sealed on factory, humidity could have gotten in and might not be safe for freezing...

Refrigeration is fine, but I've already sealed them in plastic bags as a beginning step while we both await an answer about freezing.

wblynch · Nov 24, 2013

Popped my lone roll of 46 mm straight into the freezer on arrival. I am confident it will keep well.

StoneNYC · Nov 24, 2013

wblynch said:
Popped my lone roll of 46 mm straight into the freezer on arrival. I am confident it will keep well.

It was more about moisture control since it's not sealed, I hope you at least put the box in a freezer bag first...

wblynch · Nov 25, 2013

Not worried about it

StoneNYC · Nov 25, 2013

wblynch said:
Not worried about it

Around Thanksgiving when I actually am home, and not on the road, and have the time, I'm probably going to end up putting all of my needs individual cans that I have to have lying around, if any of them for that is.

Simon R Galley · Nov 25, 2013

Dear All,

Pleased it all arrived safe.

Packaging for the ULF is a compromise I'm afraid, we have to adapt and use what we can to control the costs. I am unsure why a date stamp wasn't used, I will check it out. It was 'finished' in August so July 2018 is the 'expirey date'.

You can freeze it no problem, just put it in a protective ziplock freezer bag before you do and allow minimum 2 days to get up to temperature before using it.

Simon ILFORD Photo / HARMAN technology Limited :

LJH · Nov 25, 2013

StoneNYC said:
Around Thanksgiving when I actually am home, and not on the road, and have the time, I'm probably going to end up putting all of my needs individual cans that I have to have lying around, if any of them for that is.

You've finally done it - written something that I can't work out. This one's really got me buggered.

How about proof-reading before posting?

StoneNYC · Nov 25, 2013

LJH said:
You've finally done it - written something that I can't work out. This one's really got me buggered.

How about proof-reading before posting?

Ahh! Haha "putting my ROLLS in cans" and "if any of them FIT that is"

Sorry...

StoneNYC · Nov 25, 2013

Simon R Galley said:
Dear All,

Pleased it all arrived safe.

Packaging for the ULF is a compromise I'm afraid, we have to adapt and use what we can to control the costs. I am unsure why a date stamp wasn't used, I will check it out. It was 'finished' in August so July 2018 is the 'expirey date'.

You can freeze it no problem, just put it in a protective ziplock freezer bag before you do and allow minimum 2 days to get up to temperature before using it.

Simon ILFORD Photo / HARMAN technology Limited :

Thanks Simon! I assumed it was a cost savings, makes sense. And thanks for an expiry date, it will certainly most likely be all gone by then!

Roger Thoms · Nov 25, 2013

LJH said:
You've finally done it - written something that I can't work out. This one's really got me buggered.

How about proof-reading before posting?

Seems clear to me, he's going to eat turkey and put his film into proper storage.

Roger

Roger Cole · Nov 25, 2013

Simon R Galley said:
Dear All,

Pleased it all arrived safe.

Packaging for the ULF is a compromise I'm afraid, we have to adapt and use what we can to control the costs. I am unsure why a date stamp wasn't used, I will check it out. It was 'finished' in August so July 2018 is the 'expirey date'.

You can freeze it no problem, just put it in a protective ziplock freezer bag before you do and allow minimum 2 days to get up to temperature before using it.

Simon ILFORD Photo / HARMAN technology Limited :

Two DAYS?

I usually warm my frozen film for a couple of hours but never heard a suggestion for days before.

StoneNYC · Nov 25, 2013

Roger Cole said:
Two DAYS?

I usually warm my frozen film for a couple of hours but never heard a suggestion for days before.

If you think about how wide and long the 70mm is, since it's not sealed completely, if any moisture is in it, and crystals in the emulsion form, and then are melted, they need time to evaporate out of the central core before being shot, if they are shot too soon, you run the risk of the emulsion being raised in the moist areas. That's my guess anyway.

2013 ULF Manufacture From ILFORD Photo / HARMAN technology Limited

Privacy & Transparency

Privacy & Transparency