I got 800 ft of Vision 500T in 35mm. I got a bulk loader which I probably will use this, my friend has a Super America 35mm though with 1000ft mag... tempting.
rest in 16mm
1600 ft of 100T EXR
1600 ft of 50D EXR
400ft 100T non-EXR (older than 10 years)
400ft 4x Reversal B&W
400ft PlusX 64T/80D
(Above are unopened)
and some various short ends.
Unopened and sitting in a closet for 10 years.
How much base fog would this have? Assuming the 50D would have the least?
I know I should test, but its not here yet, I can always expose several stops slower and pull to overcome fog if needed, we often shoot at an equivalent of ISO 8 in daylight on video cameras with ND filters (5 stop filter over 250 ISO)
But was just after some info if anyone has an idea, of what speed it generally should be exposed at
without processing adjustment.
Does the decade/1 stop rule apply to motion picture film?
I have a K3 here, Im probably going to shoot with. Lens in beautiful condition, I specifically got the M42 mount so I could use a takumar prime if I wanted to.
Just took out the 3 prisms after the mirror as there was something sticking in the viewfinder and got them apart... have to get them back together after cleaning, after painting the sides black..
Will need to build a rack as well.