Recent content by SouthernKenshi

I apologize for my poor English expression skills. What I mean is that the optimal cutting width I've chosen is around 9mm. If I choose a width greater than 9mm, such as 9.2mm, my cassette might not be able to close completely due to some errors or other reasons. If I choose a 9mm cut, even with...

Yes, that's true. I apologize for my lack of rigor; I hadn't noticed this issue before because I almost never check the film counter. Whenever I take my Minox out, I quickly shoot all the film and then develop it. I use a cutter similar to the one the original poster mentioned, but I 3D printed...

It looks like there's something wrong with your camera. I use a Minox B, and the film doesn't advance when the shutter isn't pressed.

This is amazing!

Actually, all you need is a hole punch; you can 3D print the guide rail yourself.

A film punching machine capable of drilling 2mm round holes, plus a 3D-printed auxiliary guide rail with fixed-spaced protrusions to assist in drilling. By changing the guide rail, it can drill single-sided or double-sided holes.

Additionally, I need to add that the Edixa 16 has an external light meter, while the Mamiya Super 16 seems to have a very rare accessory: a front viewfinder that mounts in front of the lens. I've only seen it once on Yahoo! Japan Auctions.

I own both of these cameras. The Mamiya is just so-so, but the Edixa 16 is surprisingly good. Using a 50x scope, I observed that the image quality is even slightly finer than the Rollei 16s (under the same conditions, I'm being as precise as possible). The MEC 16 SB is too expensive. In China...

Use a dental multi-enzyme cleaner (a blue liquid) to remove mold from your lens. If necessary, disassemble your lens and completely immerse the areas needing cleaning in the liquid. Do not dilute the liquid; use it undiluted. If the mold has already corroded your lens element, then there is no...

No problem 😄

These are the dimensions I measured previously, so they may not be entirely accurate.

Thanks everyone. I tried developing my Minox B film again with this developing tank today, and I encountered the same problem. It seems I need to consider other developing methods.😄

Hello everyone, I've recently been trying out some photos with a Yashica Atoron. I split a roll of 35mm FOMA Pan 200 film into two 9.3mm films and shot them in bright afternoon sunlight. The results were great, and I really like them. However, there's a small problem: a narrow strip with lower...

I forgot, probably pyro developer

这些照片是我用柯达 ImageLink HD 拍的。它已经过期大约四年了。我仍然用 100 ISO 拍摄。我拍了以下照片。我对冲洗和拍摄经验不多，但我喜欢这些照片。另外，胶片底座是透明的。 These are the photos I got using Kodak ImageLink HD. It's been expired for about 4 years. I still took photos at 100 ISO. I got the following photos. I'm not very experienced in developing and...