Recent content by Reginald S

Rotatrim: https://rotatrim.com/shop/technical-t-series/trimmers-technical-t-series/technical-t1250 Being part of the european market, in my country I could by Rotatrim products from Monochrom, from Photolux or from Kamera Express. https://monochrom.com/Rotatrim-Technical-T-Serie-T1250...

1+ from a Sauerkraut man here :smile:

I agree - your back is well lit. :cool:

I can't remember seeing Rada symbols on the holders, but I will do the pix.

They came with these old 9x12cm / 13x18cm Plaubel metal monsters like Universal or Supra, and what I have heard they will fit old (9x12cm) Linhof backs, too. The structured parts are the base for plates or film, and the open frame as seen above will center the film; once locked, it will press...

Haven't seen any 9x12cm Plaubel Plate holders in this thread:

It smells like Foma is indicating something special :cool:

I cut Fomabrom, Fomatone and Fomaspeed directly from rolls but haven't had any problems except the Baryta papers behave like big springs with high tension. On the other hand, over the years with each roll Foma delivered some milliliters of hardener for free, too :-)

Lith developer wast fast, especially tiny amounts in tiny solutions. So your regardings are typical. As said by Dwayne better use a two or liter bath which will lead to more consistency. Plus a better learning curve, which will save the money later. ""I used 2 minutes exposure for all...

Thanks, Terry. The "copperey" colour exclusively comes from the Fomatone 532, from which I know you still have some sheets :smile: 532, a pure paper with emulsion only (no baryta)today being out of production. It liths like hell, with up to fire-like colours. If Fomatone 131/132 is slow in...

Hi Don, I appreciate your comments, thanks a lot! I love to do this things, so to me the effort has been to struggle first with room temperature issues, and then to learn a bit of handling with MT7. From here I will continue my personal task as described above: enlarging your negative to a...

Forgot to tell the print size (warm print) being 20x30cm here...

Thanks a lot Terry, will carry it to my lithprinting with sorrows thread, too! :smile: