Recent content by joe_laroids

I'm not doubting it happens! I just think not as often as it seems I have a highlight on my instagram about the T90 with some more photos and videos I'lll try and turn it into a thread on here but you can check it out on @joe_laroids in the mean time if you're interested. When i was...

Once you have removed the battery tray and the wires on the upper rewind side of the main flex there's not that much more to do. The main flex is attatched to the motor flex and SP flex with a pressure bar, so that's no soldering. But there are some tricky solder pads that are easy to damage on...

The shutter curtains are also replaceable, and it's easier to remove the melted shutter damper with the block removed

Yes I have a copy of the march/april 1990 SPT journal which i bought as a download from learncamerarepair.com It goes in depth through disassembly as well as some trouble shooting Once you've done it once it's not that difficult to get the shutter block out and back in. You can access the...

The spring tension for the shutter curtains is set with 2 little plastic screws. These can break and will release all the spring tension in either shutter. I managed to print a replacement on a resin printer and got the shutter block working again, but when i reassembled it the flashing...