This film seems to handle itself extremely well. Not bad for $0.40 a sheet in 8x10. I cut the corner with scissors to notch it.
Oh, and after finding out that I can't stand dip & Dunk in my tiny darkroom, I developed this in a Beseler print drum with no issues clearing both sides. However, it works best in drums with no pre-soak.
Very sharp where you want it to be. Why notch code it?. My stash of xray stuff seems to be equally coated on both sides. Have you gone of the effort of stripping the emulsion off of one side?
Very sharp where you want it to be. Why notch code it?. My stash of xray stuff seems to be equally coated on both sides. Have you gone of the effort of stripping the emulsion off of one side?
I can agree with the front side sharper part of notch coding, but why tie yourself down as to the 'correct' orientation.Some of my best abstracts are inverted of upside down close up fragments of a much larger scene in the original negative.
I can agree with the front side sharper part of notch coding, but why tie yourself down as to the 'correct' orientation.Some of my best abstracts are inverted of upside down close up fragments of a much larger scene in the original negative.
It doesn't have to be limiting, nothing says I have to (or will) leave it in this orientation. But I think it's still a good reference to have, is it not? Although it's also possible that the "notch" is more of a force of habit than anything.
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here.
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.