I have the copy now which works. Let me know how many and I will start copying, postage should be bugger all.
Pat

Whats the DVD of Pat?

also did you make your sink in your darkroom. I'm in position to start thinking about building it could you share your experience.

The DVD is a copy of the Calumet large format instructions, Camera assembly tilts and swings and such. I had posted this a while ago, the first copy I had was not working, hence the second post.In regard to the sinks. I have a cutting list for a PVC supplier in Newcastle. I have worked out it will take 2 sheets to make my sinks. 1x 3.2mm and 1x 6.5mm. I'm making three sinks in total. the first for the tray area. 2400 x 600 with a slight fall to a waste. The second is for the JOBO, I have already made a bench out of aluminum with a CD grade ply top. I will give this a coat with solar guard before fitting the sink. This will have a waste for the drain, overflow and used chemicals. The bottles will have a holder for re use or environmental disposal. The third will be 600x600 for a drip dry area for my measures and such. I have stainless steel shelves from a refrigerator to hold the bottles. The two sheets cost $564.00 and cutting was included. I used the 6.5mm for the base and walls on the big sink and the walls for the JOBO sink. The smaller have the 3.2mm for all and the JOBO base. I will use the Green PVC plumbing glue to join it all together. The blue is not as good. This stuff will allow you to place and set quickly. I will run a bead of sikaflex along the inside edge once completed. I will post pictures once done. Also some of the big camera conversion. Have been busy at work.
Pat