/ Register

Wanted: Sinar/horseman Lens board for Copal 3 shutter

Discussion in '[Classifieds] Want to Buy' started by BenZucker, May 21, 2010.

Thread Tools

Thread Tools

  1. May 21, 2010 #1
    BenZucker

    BenZucker Member

    Messages:
    161
    Joined:
    Jul 23, 2009
    Location:
    New York, NY
    Shooter:
    4x5 Format
    The description says it all. I also have some film to trade if you would be into that. Send me a PM if you are looking to part with one of these.
     
  2. May 21, 2010 #2
    wiltw

    wiltw Subscriber

    Messages:
    2,134
    Joined:
    Oct 4, 2008
    Location:
    SF Bay area
    Shooter:
    Multi Format
    Good luck finding one! I have never seen a Copal 3 board for Sinar/Horseman for sale.
     
  3. May 21, 2010 #3
    Mainecoonmaniac

    Mainecoonmaniac Subscriber

    Messages:
    4,589
    Joined:
    Dec 10, 2009
    Shooter:
    Multi Format
    Ebay has a bunch of them. A total of 64 are listed as of 4:30P PST.
     
  4. May 21, 2010 #4
    ic-racer

    ic-racer Member

    Messages:
    7,899
    Joined:
    Feb 25, 2007
    Location:
    Midwest USA
    Shooter:
    Multi Format
    I usually get boards in the smaller sizes. Its a lot easier to make the hole bigger, than to make it smaller. Also, there were 2 or perhaps 3 different "Copal 3" sized shutters. I have a 60mm and 63mm and there is also a 65mm shutter that all say "Copal 3."

    The "Horseman/Sinar" board will, of course, take a #3 sized hole, but the 8x8cm Horseman boards won't.
     
  5. May 21, 2010 #5
    wiltw

    wiltw Subscriber

    Messages:
    2,134
    Joined:
    Oct 4, 2008
    Location:
    SF Bay area
    Shooter:
    Multi Format
    4 listed as boards for Sinar/Horseman, but photos show boards with Copal 0 or Copal 1 sized openings.
     
  6. May 21, 2010 #6
    OP
    OP
    BenZucker

    BenZucker Member

    Messages:
    161
    Joined:
    Jul 23, 2009
    Location:
    New York, NY
    Shooter:
    4x5 Format
    Has anyone used one of these non sinar/horsman brand lens boards that ship from Hong Kong? I just want to be sure it will indeede fit my camera (8x10 Tachahara) and not end up being a flat paperweight.