red locking levers L1200

Mustang

A
Mustang

  • 0
  • 0
  • 57
32nd Avenue

A
32nd Avenue

  • 0
  • 0
  • 62
Saab

A
Saab

  • 0
  • 0
  • 67
Chevy Van

A
Chevy Van

  • 1
  • 0
  • 69

Recent Classifieds

Forum statistics

Threads
182,067
Messages
2,519,701
Members
95,488
Latest member
Crit-ter85
Recent bookmarks
0

fred

Member
Joined
Sep 8, 2002
Messages
362
Location
Belgium
Shooter
Multi Format
Dear all,

Without any doubt, this is a silly question...:smile:

Recently I purchased a L1200 with VLS500.
There are two red hendle on the enlarger head, one on each side, the so called 'red locking levers'.
What the purpose of that, and how do you use it?

Many thanks!
Fred
 

Bob F.

Member
Joined
Oct 4, 2004
Messages
3,978
Location
London
Shooter
Multi Format
Not a silly question: I used to wonder exactly the same thing....

They are used when rotating the head. In the "-" position they provide click-stops (rather than an actual lock) to centre the head vertically. In the "O" position, the click-stops are disengaged to allow easy rotating of the head.

At least, that's in my enlarger - it is possible that they are supposed to lock and that mine are damaged....

Cheers, Bob.
 
OP
OP
fred

fred

Member
Joined
Sep 8, 2002
Messages
362
Location
Belgium
Shooter
Multi Format
Bob F. said:
Not a silly question: I used to wonder exactly the same thing....

They are used when rotating the head. In the "-" position they provide click-stops (rather than an actual lock) to centre the head vertically. In the "O" position, the click-stops are disengaged to allow easy rotating of the head.

At least, that's in my enlarger - it is possible that they are supposed to lock and that mine are damaged....

Cheers, Bob.

Thanks Bob!
In my instruction manual (copy), 'finally', I found the sentence: "Operate the locking lever (8) at either side to allow the enlarger head to engage inthe 90° position; Then secure the enlarger head again with the locking knob(9)".

At one side he's doing that correctly, at the other he doesn't click. A little investigation will be necessary! :smile:

Do you have also the VLS version?
How can we controle the quality of the vc filters numbers?
With stepwedge? How to proceed?

Many thanks!

Fred
 

Bob F.

Member
Joined
Oct 4, 2004
Messages
3,978
Location
London
Shooter
Multi Format
I have the CLS450 colour head. I have no idea about the VLS head, sorry... If you do not have a manual for the head, try a Google search, or someone else here may have the head and can advise.

The click stops do not really matter as there is a scale under the head near the column that shows the head angle - just set it to be vertical.


Cheers, Bob.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom