Photoflo contamination. What exactly is the issue?

Old Willow

H
Old Willow

  • 0
  • 2
  • 55
SteelHead Falls

A
SteelHead Falls

  • 7
  • 0
  • 70
Navajo Nation

H
Navajo Nation

  • 3
  • 1
  • 44
Oranges

A
Oranges

  • 4
  • 0
  • 130
Charging Station

A
Charging Station

  • 0
  • 0
  • 112

Recent Classifieds

Forum statistics

Threads
198,124
Messages
2,770,012
Members
99,565
Latest member
DerKarsten
Recent bookmarks
1

snusmumriken

Member
Joined
Jul 22, 2021
Messages
2,411
Location
Salisbury, UK
Format
35mm
I've seen quite a number of posts on this forum implying that Photoflo/wetting agent residues left in developing tanks are a problem. What exactly is the issue? Nowadays I use Tetenal Mirasol rather than Kodak Photoflo, but through the last 40 years or so I have used several different brands of wetting agent including (originally and for many years) washing-up liquid. I rinse my tank after use, but not assiduously. I have never noticed any problem that I could ascribe to wetting agent residue. Instinctively, I would have thought that something that breaks down surface tension is likely to be beneficial rather than otherwise, but I'm probably wrong. Please enlighten me.
 

pentaxuser

Member
Joined
May 9, 2005
Messages
19,731
Location
Daventry, No
Format
35mm
Jonathan , it tends to be blamed for leaving stickiness on the reels thus inhibiting the loading of film and on balance most seem to favour using wetting agent when the film has been taken off the reel but others report no problem whatsoever in using wetting agent in the tank

I tend to take my film off the reel and place it into 600ml of wetting agent but this is largely driven by habit of manually winding and unwinding the film in wetting agent for a minute in an old plastic ice cream container

One day I am going to leave the film on the reel and pour wetting agent into the tank to see what effect it has on loading the next film.

As you say, I wonder if the drop of wetting agent in say 250-300 or 500 ml of water(120 film) in the tank can have enough of an effect on making the plastic reel sticky , especially if the reel gets a wash in plain water before being dried and put away until next time

Clearly for it to have an adverse effect on the plastic that is noticeable there must be a scientific reason why a 1+200 dilution of wetting agent on a plastic reel for a minute is enough to make it sticky in a way that cannot be undone by a quick rinse in plain water at the end

pentaxuser
 

GRHazelton

Subscriber
Joined
May 26, 2006
Messages
2,246
Location
Jonesboro, G
Format
Multi Format
I've never had a problem with sticky reels. I do occasionally run the reels through our dishwasher - top rack of course - and perhaps that has prevented any problem.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,262
Location
Southern California
Format
Multi Format
I've seen quite a number of posts on this forum implying that Photoflo/wetting agent residues left in developing tanks are a problem. What exactly is the issue? Nowadays I use Tetenal Mirasol rather than Kodak Photoflo, but through the last 40 years or so I have used several different brands of wetting agent including (originally and for many years) washing-up liquid. I rinse my tank after use, but not assiduously. I have never noticed any problem that I could ascribe to wetting agent residue. Instinctively, I would have thought that something that breaks down surface tension is likely to be beneficial rather than otherwise, but I'm probably wrong. Please enlighten me


The number one problem is people not following directions and just pouring whatever amount in the tank. So first follow the instructions and mix exactly as specified and later change if and only if experience shows a necessity. Next PhotoFlo can make reels sticky so following the instructs of Jobo and others, after washing the film, remove the film from the reel and put it in another container with the PhotoFlo mixture. That keeps the reels clean and avoid many pages of posts. Simple.
 

JerseyDoug

Member
Joined
Oct 14, 2010
Messages
382
Location
Jersey Shore
Format
35mm RF
The problem I found with Photo-Flo in Paterson plastic reels was not sticky plastic but rather that the little metal ball bearings that provide the ratchet action no longer rolled easily back and forth in their little track. I have gone back from metal reels and tanks for 120 to AP/Samigon plastic reels in Paterson tanks but with no wetting agent and no problems.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,262
Location
Southern California
Format
Multi Format
The problem I found with Photo-Flo in Paterson plastic reels was not sticky plastic but rather that the little metal ball bearings that provide the ratchet action no longer rolled easily back and forth in their little track. I have gone back from metal reels and tanks for 120 to AP/Samigon plastic reels in Paterson tanks but with no wetting agent and no problems.

So see post #4 and learn how to avoid the problem of the ball or balls getting sticky.
 

JerseyDoug

Member
Joined
Oct 14, 2010
Messages
382
Location
Jersey Shore
Format
35mm RF
So see post #4 and learn how to avoid the problem of the ball or balls getting sticky.
I've moved on from using wetting agents altogether. I hang the film vertically in the shower stall and give it one gentle downward wipe with a folded over Kimwipe wiper. No water spots, no streaks, no dust - and no scratches - and it dries very quickly.

CAUTION - Do not try this without testing it first with negatives you don't care about. I have seen no scratches with the films and chemistry I use. Your experience may differ.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,262
Location
Southern California
Format
Multi Format
I've moved on from using wetting agents altogether. I hang the film vertically in the shower stall and give it one gentle downward wipe with a folded over Kimwipe wiper. No water spots, no streaks, no dust - and no scratches - and it dries very quickly.

CAUTION - Do not try this without testing it first with negatives you don't care about. I have seen no scratches with the films and chemistry I use. Your experience may differ.

Depending on your water and your practices, you may not need a surfactant such as PhotoFlo.
 

Maris

Member
Joined
Jan 17, 2006
Messages
1,565
Location
Noosa, Australia
Format
Multi Format
I use PhotoFlo at rates of 1+1000 or 1+2000; just enough to get a stable foam. The nominal concentration 1+200 is , I reckon, waaaay too much. After the film is hung up I go back to the reels and agitate them vigorously on the centre post up and down in the developing tank full of fresh water. This is repeated until absolutely no foam forms in the tank or on the reels. The transient formation of foam is a very sensitive indicator of the presence of PhotoFlo even down to the parts per million level.
 

eli griggs

Member
Joined
Nov 15, 2005
Messages
3,833
Location
NC
Format
Multi Format
The problem I found with Photo-Flo in Paterson plastic reels was not sticky plastic but rather that the little metal ball bearings that provide the ratchet action no longer rolled easily back and forth in their little track. I have gone back from metal reels and tanks for 120 to AP/Samigon plastic reels in Paterson tanks but with no wetting agent and no problems.

That's the issue I had when I started using Paterson tanks and reels.

The metal ball would be stuck so the film does no load properly, with the side to side action required and would sometimes cause the easy action to become the bain of your darkroom life.


Even well washed reels would cause difficult windinds-on, if even a tiny bit wet, slots and balls together.


I returned to mostly steel tanks and reels for developing, using the Paterson kit on occasion.


Use Hot TAP WATER for washing up and life will once again center itself in the darkroom, IMO
 

eli griggs

Member
Joined
Nov 15, 2005
Messages
3,833
Location
NC
Format
Multi Format
By the way, the balls on these can and does corrode if no dried or left in H2O solutions.
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
To me this is an urban myth triggered even by the industry:

-) wetting agent is part of some commercial developers

-) wetting agent is watersoluable and it is does not harden after drying (unlike a varnish)

-) working strength final rinse containing wetting agent remaining on the reels and the tank after the process can be rinsed off with plain water

-) should that cleaning be omitted, residue of working strength final rinse containing wetting agent is minimal compared to a bath volume, dilution thus will be by magnitudes


Trouble only would come into existance if any the additional amount of wetting agent would cause foaming. Howerver there has been waring of such already without any final rinse contamination.
And manufacturers of dedicated develors for high-resolution films stated that wetting agent would be detrimental to their process.


In the past Jobo explicetely advised to add wetting agent concentrate to the processing tank with last washing bath with the spiral with film in it.
(Well, Jobo gave contrary advices to an extent, that likely any shool of procedures could be pleased...)
 
Last edited:

pentaxuser

Member
Joined
May 9, 2005
Messages
19,731
Location
Daventry, No
Format
35mm
So the problem with wetting agent is only with Paterson's steel balls so Jobo and Durst reels which do not use balls are OK?

Or does the stickiness affect the plastic even at a ratio of 1 ml of wetting agent to 200ml of water and the Pateron balls simply give you an additional problem ?

If it does can it be nullified by a quick rinse in plain water?

Thanks


pentaxuser
 

Moose22

Member
Joined
Jul 1, 2021
Messages
1,158
Location
The Internet
Format
Medium Format
I use PhotoFlo at rates of 1+1000 or 1+2000; just enough to get a stable foam. The nominal concentration 1+200 is , I reckon, waaaay too much.

Same. Except I might use even less.

I think it's like 20 drops to a ml, I tend to use just a few drops per roll. A liter of rinse water for 3 reels is going to get as few as 6 or 8 drops from a pipette, maybe one or two more, but I don't go more than 10 unless I squeeze the bulb too hard by mistake.

I'm using crappy disposable pipettes, so I don't know that they're exactly 20 drops per mil, but close enough. So I use less than half a ml for a liter of rinse. It's enough to make a little foam.

It does make a difference, once I hit 3 drops per reel in the small tank I started getting clean negatives, and using more didn't make it better -- what works, works. So 1+2000 feels about right to me, at least with my water and my regimen.
 

Brendan Quirk

Subscriber
Joined
Dec 3, 2018
Messages
228
Location
Mayville, WI USA
Format
Medium Format
My experience:

1. Photoflo has gradually caused a sticky build-up on the Patterson reels.
2. This build-up has not yet caused any loading issues.
3. Hot water can reduce the sticky build-up.
4. I have been unhappy with streaks and water spots DESPITE distilled water rinses BEFORE the Photoflo, and diluting the Photoflo in distilled water (per specification).
5. I have seen foam and what might be called "scum" in the Photoflo/distilled water solution.
6. I have experimented recently with NO PHOTOFLO (this despite 50 years of use); just distilled water rinses at the end, and - -
7. NO water marks, spots , etc! This for about six rolls so far.

If this continues, despite my aversion to processing controversies, I will trumpet the TRUTH (I hope this is amusing... ) far and wide!
 

gone

Member
Joined
Jun 14, 2009
Messages
5,505
Location
gone
Format
Medium Format
I've never had sticky reels. Mine got a hard build up that made spooling the film less than fun. You can prevent that by taking a tooth brush w/ some dish soap on it and giving the reels a good scrub after you develop film.

Honestly, it only takes 30 seconds a reel. FWIW, photoflo works better for me than the bargain priced liquid Arista wetting agent. You figure out a way to make both work after a while though, too much can be as bad as none.
 

cmacd123

Subscriber
Joined
May 24, 2007
Messages
4,309
Location
Stittsville, Ontario
Format
35mm
My appoch, using mostly JOBO reels is to just dump the reel in water after hanging up the film. then leaving the reel out to dry the next day. the soak is suficient to prevent any buildup.

I alos find that a half capful in a liter of water is suficient to keep drying marks at bay.
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
52,407
Location
Delta, BC Canada
Format
Medium Format
OP
OP
snusmumriken

snusmumriken

Member
Joined
Jul 22, 2021
Messages
2,411
Location
Salisbury, UK
Format
35mm
I’m intrigued but also baffled. I live/have mostly lived in a hard water area, where a wetting agent definitely helps avoid drying marks. But I have used the same three Paterson reels for the past 40+ years and have had zero trouble with the little balls. Apart from mixing exactly as prescribed, I use the stuff recklessly: I add the wetting agent to the final (distilled water) in the tank, with the reel and film in place, and twirl the reel to and fro a bit. After removing the film to dry, I sluice the tank and reel under the cold water tap and set them aside to drain. The only loading difficulty I have ever had was caused by taking the film straight from the camera, so it still had a reverse curl.

Well, I’m not complaining. Evidently there are more niggly little variables out there than I would have suspected. Thanks to all for de-mystifying the subject.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom