Petzval to Hassie....

ChristopherCoy

Subscriber
Joined
Aug 9, 2011
Messages
3,599
Location
On a boat.
Format
Multi Format
This may be a stupid question, but I know nothing of Petzval lenses, other than the brief history I've googled.

But can you adapt a smaller petzval lens to a Hasselblad 500cm body?
 

bdial

Subscriber
Joined
Jan 2, 2005
Messages
7,465
Location
North East U.S.
Format
Multi Format
You can, I've adapted one to mine, other folks have too. I'd say it works best with a Petzval that has a focusing mount. You lose shutter speed flexibility, since you're dependant on the rear shutter and your "press button/release button" tiiming accuracy. Though you could mount one to a Microscope shutter, if you can find one, or buy one of the glass-less Hasselblad lenses on ebay.
It may be hard to achieve the swirls everyone likes working when with 6x6, my Petzval is around 180 mm FL, and on the Hasselblad, the sharp center region fills most of the frame.
 
OP
OP

ChristopherCoy

Subscriber
Joined
Aug 9, 2011
Messages
3,599
Location
On a boat.
Format
Multi Format
How did you do it? And do you have any examples in your gallery?
 
OP
OP

ChristopherCoy

Subscriber
Joined
Aug 9, 2011
Messages
3,599
Location
On a boat.
Format
Multi Format
Sah weet!
 

Andrew Moxom

Member
Joined
Feb 2, 2007
Messages
4,888
Location
Keeping the
Format
Multi Format
I made an adaptor to fit a small 5" ish darlot to my hasselblad 201f ....i used a body cap and some ABS piping to get the right focal length... Worked well.

See this thread...(there was a url link here which no longer exists)
 

gandolfi

Member
Joined
Jan 28, 2005
Messages
1,820
Location
Denmark
Format
Large Format Pan
you can, but how about focussing?

I have both hasselblad and rolleiflex SL66 - the latter is very easy to fit other lenses on, and as the shutter is in the camera, there are no problems with expoeure time. Also as the lens is fitted on a bellow - focussing is easy.

I have used small projection lenses, and swirley images can be had..

see examples.

Have fun.
 

Attachments

  • kylling.jpg
    286.5 KB · Views: 287
  • rollei---petzval-deer.jpg
    204.9 KB · Views: 301
  • swirl01.jpg
    107.7 KB · Views: 264
  • swirl02.jpg
    133.6 KB · Views: 244
  • vinter-rold-petzval-(39).jpg
    256.5 KB · Views: 287
OP
OP

ChristopherCoy

Subscriber
Joined
Aug 9, 2011
Messages
3,599
Location
On a boat.
Format
Multi Format
Thats too cool! Are most of these old lenses the same diameter?
 

bdial

Subscriber
Joined
Jan 2, 2005
Messages
7,465
Location
North East U.S.
Format
Multi Format
I don't have any gallery images made with it, but here are pix of the rig.
I had a Hasselblad Lens Mount adaptor which I drilled and tapped for the Petzval's flange. Then it needed an extension tube to get it out to reasonable focusing range. Fine focus happens with the focusing rack on the lens.
 

Attachments

  • petzvalblad2.jpg
    209.6 KB · Views: 241
  • petzvalblad1a.jpg
    173.2 KB · Views: 240
OP
OP

ChristopherCoy

Subscriber
Joined
Aug 9, 2011
Messages
3,599
Location
On a boat.
Format
Multi Format
Wanna sell it? LOL.

That looks so cool! Does it work pretty good?
 

olwick

Member
Joined
Dec 18, 2007
Messages
227
Location
Seattle WA
Format
Multi Format
With the 500 series, what do you do for a shutter with a brass lens mounted?
 

johnielvis

Member
Joined
May 21, 2010
Messages
966
Format
Medium Format
use the barndoor shutter---I think I had a 500 c that synched to that shutter too--don't have that camera anymore--but that works for "timed" shots.

otherwise--rig a packard or if the lens can be front mounted in a large lf shutter, then that's the only other way--or "devise your own"
 

jp498

Member
Joined
Oct 5, 2009
Messages
1,525
Location
Owls Head ME
Format
Multi Format
Bob Herbst has installed adjustable bellows (appears to be novoflex or similar) to the front of the blad and attached a 4x4" lensboard receiver to the front of that.

It's on a private blog, so I'm not going to post a photo without permission.
 

johnielvis

Member
Joined
May 21, 2010
Messages
966
Format
Medium Format
OHHHHH...I almost forgot---use a DOUBLE cable release with any shutter that will fit the lens--then you get full functionality of the camera--I have a double myself for the old style bellows and 1.4 shifter adapter--they are tunable for synching
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…