No exposure whatsoever

cyno2023053.jpg

H
cyno2023053.jpg

  • 9
  • 2
  • 110
Molt 001

Molt 001

  • 8
  • 4
  • 128
Edison

H
Edison

  • 1
  • 0
  • 98
Edison

H
Edison

  • 2
  • 0
  • 102

Forum statistics

Threads
183,003
Messages
2,536,723
Members
95,705
Latest member
talzand
Recent bookmarks
0

bpm32

Member
Joined
May 26, 2004
Messages
36
Location
Indiana / US
Shooter
4x5 Format
SOLVED: No exposure whatsoever

Okay, I hate to have to post this, but I'm at the end of the line here...

Friday night into Saturday morning, 6 inches of heavy snow fell that stuck to everything. The old painter, Bob Ross, would've loved to paint the scenes this created. What should've been a great weekend for an amateur photographer like myself has turned into a nightmare.

I spent several hours Saturday hiking around a lake/forest looking for scenes that I just couldn't do without. I "thought" I made 6 photos - which is a record for me since I'm so stinkin' slow at LF photography.

I could barely wait to get home and develop even one of my negs.

Once I got thru the dev process, I pulled the neg out of the tube, expecting to see the image I had made earlier in the day... and there's NOTHING. Not even a hint of an image. It's as if the neg had never even been exposed.

Darn it... I KNEW I should've made a backup neg. Oh well... at least this wasn't my favorite image. The next one however, turned out the same. And the next one, and so on. I'm 0 for 6 on this trip!

I decided I'd go out the next day and try to seek those scenes out again. I was fortunate enough to find one of the six. I made 3 exposures of the same scene... took 'em home... and the same thing - they're COMPLETELY blank.

I develop each negative separately using the same process I've used for a little over a hundred previous negs. I've tried two different 4x5 cameras (same lens though!). I've never had this problem before.

At first I thought maybe I had forgetten to pull the dark slide... but on 9 negs? No way. Then I thought it was my lens... but I always make practice shots just to test the shutter before I make the exposure, and always it sounds and looks good.

I'm at a loss here. Please make any suggestions you might have - maybe it's something simple that I'm doing in my typical absent-minded behavior.

Thanks for your time!

Brian
 
Last edited by a moderator:
Joined
Dec 12, 2004
Messages
2,361
Location
East Kent, U
Shooter
Medium Format
Could of course be several causes. Are you sure the developer you used was OK? What camera exposure did you use? Was it very cold at the time? Are you satisfied that the shutter was opening? Was the shutter making a normal kind of sound?

Regards,

David
 

MurrayMinchin

Membership Council
Council
Joined
Jan 9, 2005
Messages
4,857
Location
North Coast BC Canada
Shooter
Hybrid
Hi Brian,

Sorry to hear of your mystery...after all that effort...I feel your pain!

If everything had remained the same (dev, film, shutter, dark slide), could you have loaded the film backwards in the film holder? Were the notches in the top right or bottom left? Maybe there's an Apugger out there who knows what happens when you try to expose through the anti-halation layer.

It will one day snow again and those lakes are going nowhere.

Murray
 

Sjixxxy

Member
Joined
Jul 12, 2004
Messages
433
Location
Zenith City,
Shooter
8x10 Format
Are you using a film like Tri-x that has labeling on it? If so, did it appear on the blank sheets?

If not, pull a sheet out from the pack and snip off a strip and put it into some developer in a cup to see if it turns black.
 
OP
OP

bpm32

Member
Joined
May 26, 2004
Messages
36
Location
Indiana / US
Shooter
4x5 Format
Man alive - thanks everyone for your posts so far. This is indeed a great place.

I should've given a little bit more info in the first post - sorry 'bout that.

I'm using Ilford Delta Pro 100 (4x5). I developed it in ilfosol s at 68. I haven't used this developer a lot, but had for the last 30 or so negs. They always came out fine! (at least the development did.... the composition is another story. :tongue: ) I mixed up a new batch of developer for this round of negs - I did discover the lid to the bottle of dev was not tight. As I turned the bottle on its side to read the label, the lid did leak just a very small amount out. The bottle had been sitting like that for app. 45 days. Could that have killed the developer?

I'm trying to recall what exposure my spotmeter called for metering on a gray card... something in the line of 1/2 @ f/32. (I might be off a bit on that - I don't have my notes with me.)

The temperature was around 30 degrees - nothing too cold I wouldn't think.

As for the shutter, I always look and listen carefully as to whether it's opening and if it sounds okay. I was happy with what I saw and heard during the dry fires... but I did not physically watch the shutter open while I was actually "exposing" the neg. It did sound okay though.

I kinda wondered about exposing the film if it was in backwards. The only thing that I'm scratching my head on is that I had preloaded a batch of about 20 holders at one time... 10 or so of which I had previously exposed and successfully developed. I was using the remaining 10 on this trip. I wouldn't have thought I'd messed up in the middle of a batch, but who knows.

Unfortunately, delta pro doesn't have labeling... or at least I don't think it does. I checked for that on other processed negs and didn't see any.

Again, I really appreciate your time in reading thru this, and am very open to any and all suggestions!

Thanks,

Brian
 

rogueish

Member
Joined
Apr 30, 2004
Messages
876
Location
3rd Rock
Shooter
Multi Format
You said your dev bottle was not tightly capped for 45 days. How full was the bottle? 3/4, 1/2, 1/4? Can make a difference. If the bottle was 1/2-1/4 and the air wasn't squeezed out, it could be toast.
Sjixxxy's suggestion of putting a strip of the film in a cup of developer is a good one. That will let you know for sure.
 
Joined
Dec 12, 2004
Messages
2,361
Location
East Kent, U
Shooter
Medium Format
When I worked for Ilford (1974 to 1976), Ilfosol was known internally as "Ilfoslop". It used to be supplied in bottles which were full to the absolute brim, the reason being that it was acutely susceptible to oxidization. I tried Ilfosol at the time (I think Ilfosol S is a later formulation) and found it good if you cracked open a fresh bottle, but any developer left in a part-used bottle "died" within a day or two. I have not tried it since, so cannot say if it is still as susceptible to oxidization, but it could well be.
Another test for your own piece of mind might be to expose your lens/shutter to cold for the same length of time as you did the day the shots didn't come out. This could be achieved by leaving your camera bag in the car trunk. It is conceivable that the shutter is making, for example, a "1 second" noise in terms of whirring gears but without actually opening!
Exposure through the back of film generally produces a faint image rather than nothing at all.
 
OP
OP

bpm32

Member
Joined
May 26, 2004
Messages
36
Location
Indiana / US
Shooter
4x5 Format
I usually don't like to speculate before testing, but let's pretend it is the developer. I know a lot of people will say choice of developer is simply a matter of taste. I don't think I'm to the point of being able to differentiate the two devs I've used so far: kodak d76 for about 8 years (35mm film), then recently I recently switched to ilfosol s for 4x5. I liked the ilfosol b/c it was easy to mix... but if its shelf life isn't very good unless it's in a compressed bottle... what dev would you folks recommend?

Am I hijacking my own thread here? :smile:

I won't be able to test the film until tonight... maybe tomorrow... but I will definitely leave feedback as to what I find out.

Thanks again!!

Brian
 
Joined
Dec 12, 2004
Messages
2,361
Location
East Kent, U
Shooter
Medium Format
I am sure you will get lots of different recommendations. Personally, I use Ilford ID-11. Kodak D76 is virtually the same but can be fierce if you mix it and use it straight away - good idea to leave it overnight. ID-11 and D76 become more active if stored correctly for long periods unused. There are many many exotic developers which I do not use but others swear by. Agfa Rodinal has the supreme virtue that it keeps even in part-used bottles seemingly forever, some people like the tight grain pattern it produces, like other developers it gives a compensating effect at high dilutions but may not give full ISO speed with certain films. If I could not buy any ready-mixed developer and had to mix one from raw chemicals, I would probably make some Ilford ID-2, which is great for sheet film but has not been available ready-made for a long time.
 

Tom Hoskinson

Member
Joined
Mar 7, 2004
Messages
3,874
Location
Southern Cal
Shooter
Multi Format
bpm32 said:
I usually don't like to speculate before testing, but let's pretend it is the developer. I know a lot of people will say choice of developer is simply a matter of taste. I don't think I'm to the point of being able to differentiate the two devs I've used so far: kodak d76 for about 8 years (35mm film), then recently I recently switched to ilfosol s for 4x5. I liked the ilfosol b/c it was easy to mix... but if its shelf life isn't very good unless it's in a compressed bottle... what dev would you folks recommend?
...

Brian

Lots of APUG threads on the subject of developers. There is also a lot of information in the APUG Chemical Recipes section.

A Vitamin C home brew that a lot of APUG people like is Pat Gainer's PC TEA. There are no shelf life problems with PC TEA!
 

VoidoidRamone

Subscriber
Joined
Aug 5, 2004
Messages
490
Location
New York Cit
Shooter
Multi Format
bpm32 said:
I liked the ilfosol b/c it was easy to mix... but if its shelf life isn't very good unless it's in a compressed bottle... what dev would you folks recommend?

Am I hijacking my own thread here? :smile:

I won't be able to test the film until tonight... maybe tomorrow... but I will definitely leave feedback as to what I find out.

Thanks again!!

Brian

I know that I can speak for a lot of members here (Tony and Morten especially), I would recommend Rodinal. It lasts forever and is great stuff.
-Grant
 

Ole

Moderator
Moderator
Joined
Sep 9, 2002
Messages
9,250
Location
Bergen, Norway
Shooter
Large Format
Ilfosol S is a wonderful developer, but does have that nasty habit of sudden death.

And that is the main reason why I mix my own developers these days - Pyrocat-HD, or FX-2 or Beutler's if I want a non-staining one.
 

colrehogan

Member
Joined
May 11, 2004
Messages
2,011
Location
St. Louis, M
Shooter
Large Format Pan
Tom Hoskinson said:
Lots of APUG threads on the subject of developers. There is also a lot of information in the APUG Chemical Recipes section.

A Vitamin C home brew that a lot of APUG people like is Pat Gainer's PC TEA. There are no shelf life problems with PC TEA!

I was browsing this section and couldn't find anything labeled as Pat Gainer's PC TEA. Which one is it?
 

photomc

Member
Joined
Jul 20, 2003
Messages
3,575
Location
Texas
Shooter
Multi Format
VoidoidRamone said:
I know that I can speak for a lot of members here (Tony and Morten especially), I would recommend Rodinal. It lasts forever and is great stuff.
-Grant


Agree with this, using Pyrocat-HD this weekend and got just a faint image after 20 min development time. So when I reshot the image, used Rodinal to verify everything else was OK. As stated, cheap and last a long, long time.

BTW, Sorry about the negatives..
 

Tom Hoskinson

Member
Joined
Mar 7, 2004
Messages
3,874
Location
Southern Cal
Shooter
Multi Format
Pat Gainer post on PC-TEA

colrehogan said:
I was browsing this section and couldn't find anything labeled as Pat Gainer's PC TEA. Which one is it?

(there was a url link here which no longer exists)

The following is a quote from Pat Gainer's post:

"TEA is short for triethanolamine, an organic liquid solvent and base. It will dissolve most of our developing agents to an extent useful in making concentrated stock solutions. It does not become basic until water is added.

PC-TEA as used here is:

100 ml TEA
9 g ascorbic acid (erytorbic acid, AKA isoascorbic acid works as well)
2.25 g phenidone

Heat this mixture to about 160 F and stir till it dissolves. It will stay dissolved after it cools. If it gets a brown color, don't be worried. TEA by itself turns brown upon sufficient heating. At 160, it shouldn't be any darker than HC110 concentrate.

This concentrate is diluted 1+25 or 1+50 for use on film. I don't want to brag too much, but it's pretty good stuff. Note that there is no sulfite. If you think there should be, add it to the working solution, but try it without sulfite first."
 
OP
OP

bpm32

Member
Joined
May 26, 2004
Messages
36
Location
Indiana / US
Shooter
4x5 Format
Well, I was able to squeeze some darkroom time into the schedule tonight... and I'm happy to report that you folks were right - it was my ilfosol s giving up the ghost. I developed a neg in fairly fresh d76 (that had been tightly capped) and it came out fine. I'll be darned... I can't believe how barely loose that cap was on the bottle of ilfosol s... it obviously doesn't take much to ruin it. I'm now anxious to try some of these other devs out that you all have recommended.

I can't thank all of you enough for your time in helping me out here. You've saved my sanity.

Brian
 

roy

Member
Joined
Sep 7, 2002
Messages
1,324
Location
West Sussex
Shooter
Medium Format
bpm32 said:
I can't thank all of you enough for your time in helping me out here. You've saved my sanity.
Brian

Great. At least you have put one problem behind you.
 

Bob Wagner

Member
Joined
Aug 18, 2004
Messages
21
Location
Gilbert, AZ
Shooter
Multi Format
Exposing through antihalation layer

Just for the record, from the world's foremost authority on improper film loading, you will get exposure on reversed film, it will be much fainter and of very low contrast. I know you have since discovered the problem but I am compelled to share my hard won knowledge on this subject, particularly since it's about the only thing I am absolutely sure of as far as large format is concerned.
Thanks for the reminder about keeping developer fresh, perhaps that's one lesson I won't have to learn the hard way
 
Joined
Dec 12, 2004
Messages
2,361
Location
East Kent, U
Shooter
Medium Format
As I mentioned in an earlier posting, the problem with Ilfosol was known within Ilford 30 years ago. The fact that it was not fixed in all this time is incredible and may not be totally unrelated to the company's present position!
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom