I've read this thread here: http://www.apug.org/forums/forum37/37117-varycon-experience.html But it's nine months old and only had the input of a few folks. So I'm soliciting more feedback... My own experience is pretty limited. I observed a friend printing with this paper about a year ago (which looked great). My own experience based on about 8 or 10 sheets of a box recently purchased from Freestyle was less successful. Here goes: - Very low in contrast. Dialing in a No. 4 on my LPL VCCE 670 was giving me contrast similar to using No. 2 1/2 on Forte Polygrade V. - The paper seems to be long-toed and it is very easy to produce muddy highlights. Polygrade V has a long toe but it was much easier to obtain brighter highlights when printing the same negatives. - Neutral-to-slightly-warm image tone (base is slightly warm, too) in Formulary 130. By comparison, Forte Polygrade V showed definite cold blue tones - The paper is not slow but it hits its reciprocity failure point very quickly. - I can't assess dry-down yet, as the prints are still drying. I would have thought this behavior (except for the emulsion tone) to be the result of safelight issues. But I performed a test with my dark red Kodak No. 2 and 5 minutes exposure to the safelight and subsequent processing did not produce any fogging at all. What sort of experiences are people having with this paper?