Kodak TXP Image Ident Mark

Forum statistics

Threads
179,372
Messages
2,469,001
Members
94,802
Latest member
monofinder
Recent bookmarks
0

Annie

Member
Joined
Mar 29, 2003
Messages
273
In the latest Kodak press release Re:320TXP in Sheets... they state 'Each sheet has a latent image identification mark "320TXP" and a notch code that is visible before and after processing.' Just curious how intrusive the text is for contact printing, on 11x14 sheets does the text appear once or does it appear at intervals around the entire film rebate. Also what is the best way to eliminate the '320TXP' text when contact printing.
 

SteveGangi

Member
Joined
Nov 30, 2002
Messages
485
Location
Southern Cal
Shooter
Multi Format
Checking some of my contact prints, I did not find any such marking, but these are prints made over the last 2 years. If the new batch has the markings, It is probably in the margin, outside the picture area. In that case it would not be intrusive at all, as any frame that fits (where the hell did 4x5 frames go anyway, haven't seen one in a while) would cover the marks.
 
OP
OP

Annie

Member
Joined
Mar 29, 2003
Messages
273
Thanks Steve,

My concern was that when doing platinum printing that there would be a necklace of '320TXP' printing out about the image.

It is the new stuff that has the marking.
 

Jorge

Member
Joined
Sep 6, 2002
Messages
4,515
Shooter
Large Format
Annie, regardless if it is all around or only once, if you print full frame showing the brush strokes the ident mark will show. Frankly I hope they dont do this since most of the time 11x14 are to be used for contact printing, seems kind of silly of them to ruin a print by having the ident mark on the edge of the film, but then that is Kodak for you, left hand does not know what the right one is doing.

If they do this foolishness and the ident mark is only one then you might be able to bleach it out. Of course if it is all around then this would be really hard work, I would suggest then that you mask the edge and show the print without brush strokes.
 

Jorge

Member
Joined
Sep 6, 2002
Messages
4,515
Shooter
Large Format
Looks like you are right. Well, I have heard the J and C film is very nice and comes in 400 speed. You might want to think about it if you want to show the entire print with brush strokes.
 

wm blunt

Member
Joined
Jul 13, 2003
Messages
171
Location
Missouri
Shooter
Large Format
The 4x5 Tmax I just purchased has the ident marking on the edge at the notch end of the film. It can be removed by scraping with an exacto knife.
Hope this helps
wm blunt
 
OP
OP

Annie

Member
Joined
Mar 29, 2003
Messages
273
Thanks WM.....
Sounds simple enough.... I don't want to give up on TXP just yet... it still has a zing that I have been unable to get from the J&C Classics so far.
 

wm blunt

Member
Joined
Jul 13, 2003
Messages
171
Location
Missouri
Shooter
Large Format
I've tried several films but always end up going back to good old Tri-x. Think I'll stick with it until it's no longer available...
Don't know how many times I've said that. Oh well
Wm Blunt
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab
Top Bottom