That is, quite simply, the most bitchin' enlarger I have ever seen in my life!!!
in comparison to my Beseler Printmaker 35
I had one of those, and I've still got a few of the parts stashed away. If you have everything for it and it is in good shape they are very nice machines. IIRC the weak link was the old cotton insulated power cord that runs up the column and through a bakelite plug on the top. Mine had a short in it and the experience could have been rather shocking.
So inspect that cord!
I don't know, I think you may have been right in your first description. If I were you I would make sure that it doesn't have any way to call Roswell. Don't leave it near a phone.
There was also a 35mm one that came in a tiny suitcase and when set up would serve as an enlarger or projector.
I had one of those, and I've still got a few of the parts stashed away.
By any chance, would that one be like this one?
http://cgi.ebay.com/Signal-Corps-Ph...goryZ710QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Really? Do you have any negative carriers you'd like to sell? I've got one 6x6, another 6x9. But if I could lay my hands on a 35mm and a 6x4.5 and 6x7 then I'd have all my bases covered until I get into large format and could ditch my Printmaker and pass that on to someone just getting started.
up to 6X9, but only came with a 35mm negative carrier. ......Would be interested in finding other negative carriers and a spare lens board or two.
Yes, I would like to get my hands on other negative carriers. I have 6x6 and 6x9. would like 6x7 6x4.5 and 35mm. In case there really is a Santa Claus, I thought I'd mention that!
If you can post some photos of your existing carrier with measurements, I can tell you whether my 35mm carrier will work with your enlarger.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?