Jobo with 1 water hookup?

[eddie]

Temporarily, I'm down to one faucet in the darkroom. Is it possible to run my Jobo this way? It's only for B&W processing, and I can regulate the temperature.

 

[edtbjon]

Which Jobo???

 

[eddie]

I have an ATL2 and a CPP2. Whichever one would work best.

 

[Dave Dawson]

The ATL-2 would work as long as you don't program a rinse....Just Dev, Stop and Fix steps...Then wash external.

Cheers Dave

 

[Kirk Keyes]

Just fill the CPP with water and it will temper it for you. Adjust your water temp for rinses and that's all you need.

 

[edtbjon]

Yes, with the CPP you have to adjust any rinse water temp yourself anyhow as the water inlet is only for cold water if you need to cool the whole process down. With the ATL you just have to set the temp ever so slightly below the intended process temp (e.g. 23.5C for 24C process temp).

//Björn