My grafmatic 4x5" holder disturbs my image area with a wheel leaving numbers of sequence on the negative. I don't need this. How do I remove it the proper way?
IIRC, there's a few screws around the perimeter of the body you have to remove, and then there's two screws that attach a plastic block that prevents you from removing the drawer from the body. Once you get it apart the disk is held down by a metal strap; you unscrew it, take the disk out, and then put everything back together in reverse order.
IIRC, there's a few screws around the perimeter of the body you have to remove, and then there's two screws that attach a plastic block that prevents you from removing the drawer from the body. Once you get it apart the disk is held down by a metal strap; you unscrew it, take the disk out, and then put everything back together in reverse order.