Dedicated 4x10 – available options

[Sanjay Sen]

I’ve been interested in the panoramic formats for a while, more so in the last couple of years. Recently, I’ve been looking at the 4x10 format in particular because this format, among large formats, represents the best of convenience and affordability for me. After reading Kerry’s excellent articles in View Camera magazine (Sep/Oct 2005 & Nov/Dec 2005) and some of the threads on this forum, I still have some questions related to this format which I would appreciate the answers to. So here goes, and I hope you will bear with me… Apologies if any of this seems like a repeat for anybody.

#1 - Cameras: I am aware that one can use an 8x10 camera with a slider or a split dark slide to shoot 4x10, but that is not the route I wish to take. I am looking at a dedicated 4x10 camera. Having more or less ruled out the Alt View, Lotus, Wisner and the Fotoman 4x10 cameras for various reasons, I am left with the Canham and the Shen-Hao to choose from. I assume the Canham will be better than the Shen-Hao, but it will also be more expensive. What is your experience with either or both of these cameras?

#2 - Film holders: What holders will work with the Shen-Hao? Canham? S&S?

#3 - Films: How difficult is it to cut 8x10 film in the dark? I would like to shoot color transparencies and I am not aware of any such film in the 4x10 format. So I would either have to cut 8x10 film myself or send it out to a shop that does this.

#4 - Vertical mode: Is it possible to shoot any of the currently available 4x10 cameras with the camera in the vertical position?

#5 - Contact printing: Some folks say 8x10 is the smallest size for contact prints, so my question is: do 4x10 contact prints “work” for you? I know some photographers make and sell 4x10 contact prints, so I think this would really be a matter of personal opinion depending on the subject and on other aesthetic considerations. What is your opinion about this?

#6 - Enlarging: For enlarging a 4x10 negative, are there any negative holders readily available, or do I need to fabricate one from an 8x10 negative holder?

#7 – Finally, should I forget everything above and just get an 8x10?


Thank you for having the patience to read through this (if you have come so far, that is ) and all your inputs and opinions will be much appreciated.


Regards,

 

[Stew Squires]

You might check out my brother's site at www.scottsquires.com. He went the 4x10 route with an 8x10 Canham. He followed a lot of Kerry's recommendations with regard to cutter and process and describes his efforts there to get 4x10 film. He shoots primarily 4x10 with the Canham. I have a Wehman 8x10 and plan to waste film and crop. One benefit of the 4x10 camera is that you get away with less coverage lenses. A number of his 4x5 lenses are perfect for 4x10, but not 8x10.

Stew

 

[juan]

Some ramblings - I'd suggest you see if you can get your hands on an 8x10 and try the slider route for a weekend. That would answer your questions about whether the format works for you. I've done this, and quite frankly, I'm not so impressed with the print size. Probably I haven't worked hard enough at it.

I did find a difficulty - if you are taking two photographs on one sheet of film, it's sometimes difficult to find two shots that would be developed the same. From this experience, I would say that you are correct in wanting an actual 4x10 camera (if you find the negative size acceptable.)

Cutting 4x10 film in the dark is relatively easy - just put down a relatively thick piece of tape on your cutter marking the edge of the film. 4x10 from 8x10 is only one cut, so it's not that complicated.

Good luck.
juan

 

[Colin Graham]

A 4x10 back for an 8x10 would probably give you the most options. Easy to do verticals and don't have to use a splitter which throws you out of the sweet spot of the lens' coverage, and a Wehman with a Canham back would probably weigh less than a shen hao or any other dedicated 4x10. (I beleive Wehman will make adapters for aftermarket backs, or maybe that was Phillips). And you still have an 8x10 if you want a break from pano. I agree with Juan, the size does seems smaller than expected; oddly, they seem smaller to me than 5x7. But alot of people like 4x5 contacts.

 

[Stew Squires]

I asked Bruce about building a 4x10 back using a Canham holder. He said he couldn't commit to something like that for over a year. And I asked Canham about building a modified back for the Wehman and he said I wouldn't be excited about what I would have to pay him to do it (paraphrase). If you are going the Canhan route, undedicated, get the 8x10 and his 4x10 back.

Stew

 

[Vaughn]

#5 Yes, it is large enough (or it is until I get a 7'x17"!). They make a nice presentation on a 12x16 mat.

#7 Don"t forget it, but keep it in mind as a serious consideration -- especially if you think you would use a full 8x10 someday. If money is no object and one goes out to photograph just 4x10, then a dedicated 4x10 would be much much simpler and straight forward to use than my method of using a cut-in-half 8x10 darkslide. I do like having the option of being able to use either format by only having only one piece of inexpensive equipment weighing a few ounces to carry around.

I have enough rise and fall on the front of my Zone VI 8x10 to center the lens for either the top or bottom 4x10 half of the 8x10 sheet of film...handy with short lenses.

Vaughn

 

[Tom Duffy]

Print some 4 x10's for a while and decide for yourself if it's too small. For me it would be. Consider that you are probably really looking at an actual image area of 3 1/2 by 9 1/2 at most.

I owned a 5x7 Canham and I think he makes the best wooden field cameras. As has been pointed out, if you buy a 4x10, all you'll need is a new back and bellows from Canham ot convert to 8x10 or have a multiple format camera.

Cutting film down is easy, but use a high quality cutter like a dual track Rotatrim.

Now that you have a 4x10 exposed sheet of transparency film, be sure you have a couple of sources for getting it developed. You will probably pay the same price as you would for an 8x10 sheet. I'm not sure a Jobo expert 8x10 drum could safely handle a 4x10 sheet of film, either.

When I looked at this 4x10 question including the cost of 4x10 holders and all, I decided that if I really wanted a 4x10 piece of film, it would be just as cheap to shoot 8x10 with 4x10 marked on the ground glass and cut the film after it was developed.

Hope this helps and good luck with your decision.

Take care,
Tom

 

[ReallyBigCameras]

Sanjay,

You've already got some good answers to most of your questions. I'll see if I can provide a little more help.

Concerning cameras - as you've read my articles, you know I'm using a hybrid 4x10 monorail I assembled on an ARCA-SWISS F-Line chassis with a back and bellows from Lotus. I absolutely LOVE this camera. It's a true joy to use. Since my articles came out, I've upgraded my front standard to an F-Line Metirc Format Frame with micrometic Orbix axis tilt. Here's a photo showing that configuration:

I am currently in the process of re-building the back standard based on my 7x17 Franken-ARCA design. This will make it more rigid and compatible with the newer F-Line rear function carrier (instead of the older style rear function carrier shown in the photo).

I don't shoot vertical "panoramas", but if I did, it would be a simple modifcation to add a second dovetail plate to one side of the camera back to permit using the camera in a vertical mode. I also have the 8x10 front format extender (for use on my 7x17 Franken-ARCA) that could then be used to help add enough additional front rise to center the lens on the vertical 4x10 image area. So, vertical 4x10 would be easy enough to implement based on my existing design.

While this is a unique one-of-a-kind camera, it would be fairly easy to assemble one yourself based on a monorial of your choosing (I like the ARCA-SWISS for the modular construction, compact design and high quality, but another brand could be used if you wish). Shen-Hao makes an inexpensive 8x10 - 4x10 reducing back that could be cut down to the 4x10 size. You could make a simple rectangular wooden box frame for this and get a custom made bellows from Camera Bellows in England. If I was building another 4x10 hybrid today (and didn't luck into a 4x10 Lotus concversion kit on the German eBay), this is the route I would personally take.

That said, if you're not a do-it-yourselfer and just want an off the shelf solution that gets you out taking pictures, there are certainly options available. If you told us why you ruled out the Wisner, Lotus and Altview, I could probably offer some more detailed advice. The Lotus and Canham are very similar in specs and design. So, I'm not sure why you ruled out one and not the other.

I haven't used the 4x10 Shen-Hao yet, but I'm hoping to get one to review soon. It's priced similar to the Altview, but with a longer bellows and more movements. It will also likely be considerably heavier, but that may not be an issue for you.

As far as contact printing goes, I shoot almost exclusively color tansparency film in 4x10. While 4x10 can be contact printed, in this format I prefer to enlarge (I make 12x30 color inkjet prints from scans of my 4x10 color transparencies). For contact printing, I prefer the 7x17 size.

As far as holders and cutting film, I am expecting to get a new 4x10 camera from Fotoman, along with some 4x10 holders they are manufacturing in China, as well as a dedicated 8x10 to 4x10 film slicer for review soon. The dedicated film slicer should make cutting down 8x10 film even easier.

Hope that helps,
Kerry

 

[Sanjay Sen]

You might check out my brother's site at www.scottsquires.com. He went the 4x10 route with an 8x10 Canham. He followed a lot of Kerry's recommendations with regard to cutter and process and describes his efforts there to get 4x10 film. He shoots primarily 4x10 with the Canham. I have a Wehman 8x10 and plan to waste film and crop. One benefit of the 4x10 camera is that you get away with less coverage lenses. A number of his 4x5 lenses are perfect for 4x10, but not 8x10.

Stew

Stew, thanks for post. I did go through Scott's website when he posted a thread with his experiences with the Canham 8x10/4x10. It was an interesting read and I'm looking forward to more updates. BTW, I emailed Richard Ritter and he said it was possible for him to build a 4x10 back for a Wehman, so you might want to explore that option since you mentioned that you were going to use a Wehman 8x10 to shoot 4x10.

 

[Sanjay Sen]

Thank you all, guys, for your advice and opinions, and for taking the time to read through my long post. I appreciate your help.


Kerry,

I am envious of your custom 4x10! Unfortunately, I am not a DIY kind of guy and will have to make do with something off the shelf, or enlist someone's help. For now, I would prefer to go the off-the-shelf route.

I ruled out the Wisner because of two reasons - the issues with the holders and the man's reputation, which seems to have taken a beating lately (from threads that I've seen in this forum). I ruled out the Lotus because of cost. At current dollar values, EUR 3500 (as of 04/2006, excluding VAT) is more than I can afford. Lastly, I ruled out the Alt View because of it's non-folding design and limited movements although it does have the advantage of being able to shoot vertically. I have a Cambo 4x5 monorail that I haven't been able to take out to the field a few yards beyond the car. So, if I am getting another LF camera I would like to be able to hike with it.

I will be looking forward to your review of the Shen-Hao 4x10, as well as the 8x10 to 4x10 film slicer. That would be really interesting.

As far as film goes, I plan to shoot color transparency film and B&W. The former will go off to a lab for processing (and some printing) while the B&W will be tray-processed at home, and printed at a rental darkroom (no room in my apartment for an 8x10 enlarger).

I would be interested in hearing your thoughts.


And once again, thank you all for your help with this.


Best wishes,

 

[ReallyBigCameras]

I ruled out the Wisner because of two reasons - the issues with the holders and the man's reputation, which seems to have taken a beating lately (from threads that I've seen in this forum).

Ron can/could make a good camera. It's unfortunate what has happened to his reputation and his company. Just shows how important customer service is, even in a niche market like 4x10 cameras. The reason I asked is I know where there is a used 4x10 Wisner Technical for sale at the same price as a new Shen-Hao. If you're interested, Pm me and I'll send you a link. I haven't seen this particular 4x10 Wisner in person, but it's the same design as the 4x10 Wisner I used to own back in the mid-1990s. I never had a problem with the camera, but had endless lightleaks ith the Mido II holders - and they were the only option in 4x10 holders for the Wisner back then.

Ironically, I now have accumulated several holders in the 4x10 Wisner/X-ray form factor (thanks mostly to eBay). They aren't for sale as I have plans for them. I'd love to make a 4x10 back for my Toho (picture a 3.5 lb. 4x10) for backpacking. They are also a little smaller and lighter than the 4x10 holders from Canham and others. I may also get a back made that will let me use these holders on my 4x10 Swiss Lotus. The back on my camera is removeable. So, a second back would double the number of usable 4x10 holders I own.

Anyway, both S&S and AWB will make 4x10 holders to fit the Wisner. Or, you can have the back modified to take the Canham holders. So, while customer service may be a concern, holders shouldn't stop you from considering a 4x10 Wisner.

I ruled out the Lotus because of cost. At current dollar values, EUR 3500 (as of 04/2006, excluding VAT) is more than I can afford.

Lotus is an unfortunate victim of exchange rates. Back when the euro was worth $0.85 their products were priced competively. These days, customers in the US pay a premium due to the week dollar. It's too bad as the Lotus cameras I've used/reviewed were very nice and I wouldn't trade my 4x10 Lotus holders for anything. They are simply exquisite. You might want to watch the German eBay site for used Lotus cameras. An extremely nice 5x7 Lotus outfit, complete with lens (180mm APO Symmar), film, film holders, case and tripod (Berlebach) closed on the German eBay yesterday for EUR 1509. It was a tremendous deal and it was all I could do to keep myself from bidding on it. If you get a good deal on a used Lotus, you could then purchase a 4x10 conversion kit for it.

Lastly, I ruled out the Alt View because of it's non-folding design and limited movements although it does have the advantage of being able to shoot vertically. I have a Cambo 4x5 monorail that I haven't been able to take out to the field a few yards beyond the car. So, if I am getting another LF camera I would like to be able to hike with it.

Ironically, I've seriously considerd getting an Altview 410 WA for backpacking. It doesn't fold, but it's the lightest of the available 4x10 cameras, and with careful packing (putting the rest of your gear around it in a custom case), it would still fit in a pack. It's certainly a unique and beautiful camera. The movements are limited, but I think I could probably get by.

I will be looking forward to your review of the Shen-Hao 4x10, as well as the 8x10 to 4x10 film slicer. That would be really interesting.

It will likely be a few months before any review is published, but once I get the 4x10 Shen-Hao and the Fotoman film slicer, I'll drop you a short PM with my initial impressions.

Kerry

 

[Sanjay Sen]

Thanks again Kerry for all the information. I appreciate your info about the Wisner that's up for sale but I think I need to debate all the options some more. If I make up my mind soon enough, I will drop you a PM.

Another option that has been introduced into the mix is getting a Canham 8x10 with a 4x10 back - an idea that I got from Colin and from Scott Squires's website (here). Although this is a departure from my original plan of a dedicated 4x10 camera, it has the advantages of being able to serve the purpose of an 8x10 (of course) and the ability to shoot 4x10 verticals.

As an aside, I just subscribed to View Camera magazine, so I'll be looking forward to your articles and reviews, especially anything to do with 4x10.


Best wishes,

 

[Russ Young]

I use both the Alt-view and the Canham 4x10. Both have distinct advantages.
The Canham is based on a 5x7 camera and not an 8x10; thus I have a 4x5, 5x7 and 4x10 all in one case; very handy.

The Alt-view, besides being exquisitely beautiful, is very light AND sets up in an instant, rather important in the fast changing light of the Southwestern US and coastal Scotland. Because of its weight (or non-weight), this is my grab-and-go camera, with 210 and 300 lenses, carbon fiber tripod, and a couple of holders in my vest...no backpack needed, camera stays on the tripod with a plastic cover on it. Easy to walk to the top of the nearest Tor wth it.

Both builders have impeccable reputations for customer service. If you need help, they are there for you.

Russ

 

[Emile de Leon]

Have you ever thought of having a 6x10 camera made? I have a Wista metal Rittreck 5x7 w/6x10 back that is very, very precise. Wisner also makes one. It seems the perfect format to me, smaller than 8x10. Corresponds very closly to the golden mean and a nice compliment to 12x20 ULF. You can of course easily crop to 4x10 if you want. 4x10 contacts are very beautiful but you better make sure you really love the long and skinny 4x10 format to invest that kind of cash. I do 4x10/5x8 /8x10 on a Deardorff with homemade mattboard splitters and consider this a wonderful 3 in 1 format camera. Sometimes 5x8 is called for, sometimes 4x10, sometimes 8x10, but at least I have a multitude of choices with the Deardorff.
Hey Kerry...that 4x10 is one hell of a machine! What I wouldn't give to have Micrometric Orbix on all my cameras! Emile/www.deleon-ulf.com.

 

[mark]

I can't find a color photo of the altview. With all the talk about beauty I would like to see one. Is there a photo on the web somewhere?

Having had this discussion with myself I took the advice to get the 8x10 and use a splitter. While this fit my budget better than a 4x10 dedicated camera, I have a feeling I will be putting a dedicated 4x10 on the wish list.

 

[Emile de Leon]

The Alt 4x10 is one of the most beautiful cameras you will ever encounter. Lacewood w/ dark Wenge trim and many, many layers of finish applied. Stunning! No I don't have a picture of it but Patrick Alt does. Emile.

 

[JasonC]

Altview 4x10 on MPEX.

Dead Link Removed

 

[mark]

That is a pretty camera. For those folks who own one, does the two parts on the front swing that stick out get in the way?

 

[Russ Young]

Just for grins, I weighed the Altview with the 210 Computar = 5 pounds, 10 ounces. When hiking with it, I use a GG protector which probably adds about six more ounces. No, Mark, none of the parts get in the way- the brass "pull" is very nicely rounded which prevents it from being a hazard.
Russ