Collodion on Acrylic?

Hiroshima Tower

D
Hiroshima Tower

  • 0
  • 0
  • 11
IMG_7114w.jpg

D
IMG_7114w.jpg

  • 2
  • 0
  • 55
Cycling with wife #1

D
Cycling with wife #1

  • 0
  • 0
  • 53
Papilio glaucus

D
Papilio glaucus

  • 2
  • 0
  • 39
The Bee keeper

A
The Bee keeper

  • 1
  • 4
  • 168

Recent Classifieds

Forum statistics

Threads
198,190
Messages
2,770,826
Members
99,574
Latest member
Model71
Recent bookmarks
0

MMfoto

Member
Joined
Sep 11, 2004
Messages
425
Format
Super8
I'm interested in the collodion process and have wondered about using acrylic sheets instead of glass. The material is much lighter, can be clearer, and will not break if dropped/mishandled. It does of course scratch quite easily, but no more so than sheet film. So, I suppose my question should be: will the emulsion take to the acrylic surface? Anyone tried this?
 

JG Motamedi

Member
Joined
Dec 18, 2004
Messages
472
Location
Portland, OR
Format
Large Format
The ether will not affect the acrylic, so you could probably use it, however I am unsure of the collodion would stick to the acrylic. I use acrylic inside my plate holders, and the collodion seems to peel off quite easily. Worth trying I suppose, but I think the scratching would be a pretty major drawback.
 

htmlguru4242

Member
Joined
Aug 9, 2005
Messages
1,012
Location
Eastern NC, USA
Format
Multi Format
Hmmm - that's an interesting idea, what about doing it on acetate film like regular old sheet film - could it be done on a non-rigid surface?
 

JG Motamedi

Member
Joined
Dec 18, 2004
Messages
472
Location
Portland, OR
Format
Large Format
htmlguru4242 said:
Hmmm - that's an interesting idea, what about doing it on acetate film like regular old sheet film - could it be done on a non-rigid surface?

I suspect the collodion would start flaking off as the film is flexed. Sandarac varnish with lavender oil is flexible, but probably not flexible enough.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,237
Location
North Carolina
Format
Multi Format
When I used to seal model airplanes with nitrate dope (which is very similar to collodion), we used to add a few drops of castor oil to a batch of dope that needed to remain flexible or not shrink as it cured. I expect something similar to this (generically, a "plasticizer") would help a lot if you wanted to try collodion on acetate or other flexible base. However, you'll probably also find you need to sub the base, or use a textured material (like drafting acetate, which is frosted on one side). And I expect acetate would be a bad choice for collodion, since many of the solvents that dissolve cellulose nitrate also dissolve cellulose acetate.

Oddly, *paper* takes nitrate dope well, so might accept collodion well also...
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom