/ Register

Cleaning old slides

Discussion in 'Color: Film, Paper, and Chemistry' started by Kevin Caulfield, Oct 10, 2005.

Thread Tools

Thread Tools

  1. Oct 10, 2005 #1
    Kevin Caulfield

    Kevin Caulfield Subscriber

    Messages:
    3,629
    Joined:
    Aug 3, 2004
    Location:
    Melb, Australia
    Shooter:
    Multi Format
    My wife just discovered a box of old Kodachrome and Agfa slides. They are old family photos, 30 to 35 years old, and most of them have the appearance of being scrartched. Closer inspection reveals that it is probably more dirt than scratches. I intend to try cleaning them and then printing them. My idea was just to use wetting agent like Agepon which I use when processing B&W film, and gently wipe them with my fingers. I'll try first with a less important pic. Any ideas on what else to use, or whether this should work or not would be greatly appreciated. Thanks.
     
  2. Oct 10, 2005 #2
    Dave Parker

    Dave Parker Inactive

    Messages:
    4,031
    Joined:
    Aug 14, 2004
    Shooter:
    Multi Format
    Don't touch the emulsion with your fingers at all, there are several different emulsion cleaners on the market designed to do this very thing, Omega Satter makes one that we used to use in the photo shop I worked at, unfortunately non of them are 100% effective we found in actual use, but they will clean some of the dirt up that may make it easier to scan or view them..but again, don't touch the emulsion with your fingers, even with solution on your finger tips you still run the risk of depositing oils on the slide, we used to use the special q tips designed for cleaning tape heads.

    Dave
     
  3. Oct 10, 2005 #3
    gbroadbridge

    gbroadbridge Member

    Messages:
    371
    Joined:
    Nov 18, 2004
    Location:
    Sydney, Aust
    Shooter:
    Multi Format
  4. Oct 10, 2005 #4
    Neal

    Neal Subscriber

    Messages:
    1,762
    Joined:
    Dec 3, 2004
    Location:
    Chicago, Wes
    Shooter:
    Multi Format
    Dear Kevin,

    Check out PEC pads and cleaner.

    Neal Wydra
     
  5. Oct 11, 2005 #5
    modafoto

    modafoto Subscriber

    Messages:
    2,102
    Joined:
    Oct 17, 2003
    Location:
    Århus, Denma
    Shooter:
    Medium Format
    Me too! I use this a lot for cleaning old negs and slides before scanning or copying.

    Morten
     
  6. Oct 11, 2005 #6
    OP
    OP
    Kevin Caulfield

    Kevin Caulfield Subscriber

    Messages:
    3,629
    Joined:
    Aug 3, 2004
    Location:
    Melb, Australia
    Shooter:
    Multi Format
    Thanks a lot for all the replies.
    Graham (seeing you're in Oz), any idea where I could buy isopropyl alcohol?
    Thanks.
     
  7. Oct 11, 2005 #7
    gbroadbridge

    gbroadbridge Member

    Messages:
    371
    Joined:
    Nov 18, 2004
    Location:
    Sydney, Aust
    Shooter:
    Multi Format
    Kevin,

    A little goes a long way - I purchased 2 x 4oz bottles from 3M over a decade ago and they are still going stong. It was sold as a 3M cleaning kit with two bottles , wipes and lint free cleaning cloths.

    Perhaps call 3M, and ask about Computer cleaning solutions - it was used to clean the heads in disk and tape drives.

    I'll ask my local pharmacy about it too - he's used to me asking for strange chemicals that would raise eyebrows elsewhere.

    Graham.
     
  8. Oct 11, 2005 #8
    Steve Roberts

    Steve Roberts Member

    Messages:
    1,159
    Joined:
    Oct 12, 2004
    Location:
    Near Tavisto
    Shooter:
    35mm
    I use carbon tetrachloride, which, I am told, also kills fungus that so often affects old slides.

    Steve