Are rear elements interchangeable on these lenses?

Discussion in 'Large Format Cameras and Accessories' started by JMC1969, Feb 13, 2009.

  1. JMC1969

    JMC1969 Member
    Ads Enabled

    Messages:
    576
    Joined:
    Apr 7, 2008
    Location:
    Jacksonville
    Shooter:
    Multi Format
    A little more help please. Not too long ago I posted a question about using only the front element of a Calumet Caltar-S II 8 1/4" (210mm) F5.6 because the rear element has a bad chip out of it.

    Link:sad:there was a url link here which no longer exists)

    Recently, I started another thread because I was given three cameras, 2 Speed Graphics and a Meridian. The one I have cleaned up has a Ilex-Calumet Series-S Caltar NO.269 8 1/2" (215mm) F5.6. If you check the last page of the link below, you will see it is very soft due to (I believe) major cleaning marks/scratches in the coating (glass doesn't actually seem to be scratched).

    Link:sad:there was a url link here which no longer exists)

    So I am wondering if these two lenses are close enough to make one really nice lens. The front element of the 210mm is without a mark and the rear of the 215mm is pristine. As they are made by the same company (though I assume many years apart), both F5.6, both Caltar w/ an "S" (possibly meaning symmetrical). Would it be the front element that has the 5mm difference in it and leaving the rear element equal?

    Thank You,
    Jody
     
  2. archphoto

    archphoto Member

    Messages:
    965
    Joined:
    Dec 14, 2008
    Location:
    Holland and
    Shooter:
    4x5 Format
    As I said before: give it a try if it fits properly together...

    You could allso have a second look at the Caltar if it can not be cleaned better.

    With symetrical lenses it is common that the front and rear parts have diferent sizes, don't worry.

    Good luck,
    Peter
     
  3. davekarp

    davekarp Member

    Messages:
    113
    Joined:
    Nov 19, 2004
    Location:
    California
    Shooter:
    4x5 Format
    The Caltar S-II was made by Schneider. The Ilex-Caltar was made by Ilex. Two different lenses and companies. Calumet contracted with various companies at different times to supply lenses under the Caltar brand name, which is Calumet's store brand.

    Whether or not it will work is another question.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies. If you have a Photrio account, please log in (and select 'stay logged in') to prevent recurrence of this notice.