kjsphoto
Subscriber
- Joined
- Apr 21, 2004
- Messages
- 1,320
- Format
- Sub 35mm
Ok I am getting ready to frame in the walls and putthe roof on and I really need advice on the darkroom size.
I have a 12x24 exterior deminision. And I had the darkroom set to 10x12 leaving me with an office / dry area to mount and cut mats of 14x12 minus the 2x4 and sheetrock.
But when I designe dthe layout I didnt have a bathroom 3x5 and I added it. You never know and I do not wnat ot have to run into the house.
So I want to pick up some room because of the loss. I want to be able to make up to 30" prints. If I moved the wall back to 9 or 8 foot 8x12 or 9x12 would this work?
It would look like this;
---------------------
*************** -
****12L x 8W**** -
*************** -
------------******-
*9W***** -*****-
--------------------
*10W***********-
---------------------
For 8' longer L. I would put the door from the
outside at the L position.
For 9' short L
With the 8 and 9 I would have a slight L shape but with the 10" I would have a rectangle.
The reason is that I already dropped in plumbing and layed the sub-floor today and I am not going to redo it as it is done.
Any advice at this point would bt greatly apprecaited.
Thanks,
kev
I have a 12x24 exterior deminision. And I had the darkroom set to 10x12 leaving me with an office / dry area to mount and cut mats of 14x12 minus the 2x4 and sheetrock.
But when I designe dthe layout I didnt have a bathroom 3x5 and I added it. You never know and I do not wnat ot have to run into the house.
So I want to pick up some room because of the loss. I want to be able to make up to 30" prints. If I moved the wall back to 9 or 8 foot 8x12 or 9x12 would this work?
It would look like this;
---------------------
*************** -
****12L x 8W**** -
*************** -
------------******-
*9W***** -*****-
--------------------
*10W***********-
---------------------
For 8' longer L. I would put the door from the
outside at the L position.
For 9' short L
With the 8 and 9 I would have a slight L shape but with the 10" I would have a rectangle.
The reason is that I already dropped in plumbing and layed the sub-floor today and I am not going to redo it as it is done.
Any advice at this point would bt greatly apprecaited.
Thanks,
kev