I haven't done any printing in many years but I just bought a 23CII XL enlarger on ebay and would like to get started again. The enlarger is setup for 35mm with neg carrier and 50mm El Nikor lens. I would like to also use it on 6x4.5 negs from my Bronica Etrsi and was wondering if anyone uses the 6x6 neg carrier for 6x4.5. I have found the 6x6 on ebay but no 6x4.5 negative carrier and they seem to be very expensive new. I also need an 80mm lens and lens board as I assume each lens needs a lens board. any ideas appreciated.